Quote:
Originally Posted by kozak  I thought you could only safely run 5psi? Looks good anyways. |
You can run as much as you think that stock bottom end can take
The rule of thumb used to be 400rwhp on a stock bottom end but since then we we've pushed the limits. I'm sure someone will come in and say so-in-so made 5xxRWHP on a stock bottom before too long
.
Quote:
Originally Posted by enigmah Stupid noobie question here but what all would have to be done motor wise ( intake, tb, injectors, ) wise and stuff for this kit to work? |
We upgraded the injectors to 60lbs, dropped in a Walbro 255, and replaced the plugs with NGK TR6s.
That's all we did
It also had an aftermarket exhaust system.
The kit is designed for a stock engine compartment with no modification needed.
Quote:
Originally Posted by NemeSS are the hot parts available in mild steel?
i think mild steel parts would sell very well to the budget crowd. |
No. We don't make mild steel manifolds. The crossover and downpipe are aluminized mild steel.
$1300 for the set isn't affordable?
Quote:
Originally Posted by cracker Any pictures of K-Member and Ground clearance?
Looks like an awesome kit!
-Wade |
Customer has the car now... I never got pictures of the final exhaust system, downpipe and ground clearances
I promise to get those for you all once he comes back in. I'm sure it wont be long since he's driving on a stock clutch
Nick