Quote:
Originally Posted by Corvettekid82  Cool, thanks for the tips guys... it did help. I'm still struggling with adjustments. Up and down is easy, but the left and right isnt working well for me. The screw moves them left and right for a bit, but then starts moving them down the further out they go. I think I'm gonna try some spacers from lowes. If that doesnt help, I'll try and open up the lights this weekend and adjust the projector itself.. and if that doesnt work I'll try the stock headlight brackets.   |
Looks like your getting the adjust almost down. It still looks like you could get away with spreding them out a bit more. They look very concentrated in the middle.
Just an FYI, on the bottom of the housing there is phillips head screw that you can adjust and it will push out the bottom of the headlight.
Circled in pic
Adjusting this will essentially tilt the headlight up, and this will allow more adjustment as well as close up any gaps you might have. Just like the other type of projectors where the guys had to use washers to close the gaps, these housing don't need them. You can just turn out that screw it is plenty long. I'll get more pics of this adjustment this weekend.