LS1TECH - View Single Post

Schurters LT1 · 01-18-2009, 10:56 AM

Hey Guys,

Well i am selling off everything, i have all the right parts here to make a 600-1000hp car all hi-end parts SO PLEASE NO LOW BALLERS

This is off my 95 T/A

I HAVE PICS OF EVERYTHING I WILL POST OR I CAN EMAIL THEM

Vortech cog pulleys 36mm, 78 teeth crank/30 blower

custom 4" suck side and air filter

vortech mondo BOV

Alky control kit
singal kit & new dual kit as well, with an new extra pump $440

Nitrous Outlet elbow for Vic intake i will through this in with the heads and intake

Vic Jr intake with fuel rails its fully ported and matched to the heads this stuff is a one off
matching AFR 220 heads
These are Z8's old AFR heads(220) that were ported by GTP that flow 330cfm@.600 and mating Vic intake you will not find another set of heads like this with shaft mounts 1.7r $3000.00

sphoon TQ arm $350

ATi extra keyed crank hub/balancer with bored out front cover
e-water
custom Bret B blower cam
Morrel's lifters new

Moroso valve cover breathers red # 68721

MSD 3 bar map sensor new in box

BMR strut tower brace

weld nuts and washers for weld wheels new in a bag

LT1 pcm

spacers for weld wheels

A/C delete pulley new in box

MAKE OFFERS

drive shaft for M6 tranny to match up with the 9" to handle 1000hp $300.00

weld wheels

15x10.5 with 7.5 bs $300 and hoosher slicks $100

IF DOING PAYPAL ADD 3%

obo

01-18-2009, 10:56 AM	#1
Schurters LT1 TECH Regular Trader Rating: 1 Join Date: May 2004 Location: Kitchener, Ontario Posts: 406	Parts 4 sale Hey Guys, Well i am selling off everything, i have all the right parts here to make a 600-1000hp car all hi-end parts SO PLEASE NO LOW BALLERS This is off my 95 T/A I HAVE PICS OF EVERYTHING I WILL POST OR I CAN EMAIL THEM Vortech cog pulleys 36mm, 78 teeth crank/30 blower custom 4" suck side and air filter vortech mondo BOV Alky control kit singal kit & new dual kit as well, with an new extra pump $440 Nitrous Outlet elbow for Vic intake i will through this in with the heads and intake Vic Jr intake with fuel rails its fully ported and matched to the heads this stuff is a one off matching AFR 220 heads These are Z8's old AFR heads(220) that were ported by GTP that flow 330cfm@.600 and mating Vic intake you will not find another set of heads like this with shaft mounts 1.7r $3000.00 sphoon TQ arm $350 ATi extra keyed crank hub/balancer with bored out front cover e-water custom Bret B blower cam Morrel's lifters new Moroso valve cover breathers red # 68721 MSD 3 bar map sensor new in box BMR strut tower brace weld nuts and washers for weld wheels new in a bag LT1 pcm spacers for weld wheels A/C delete pulley new in box MAKE OFFERS drive shaft for M6 tranny to match up with the 9" to handle 1000hp $300.00 weld wheels 15x10.5 with 7.5 bs $300 and hoosher slicks $100 IF DOING PAYPAL ADD 3% obo __________________ Harshaw Racing Engines 355, Gen 7 , T-Trim , Custom cam , ALKY , Larger FMIC , The lil ole LT1 just put down 686rwhp and 590rwtq! Pics of car in work http://videos.streetfire.net/video/9...2200b23723.htm http://community.webshots.com/user/jschurter http://video.ls1tech.com/video/2790a...385a874b8f.htm Last edited by Schurters LT1; 02-07-2009 at 11:13 AM..