LS1TECH - View Single Post

98legendws6 · 01-20-2009, 08:59 PM

Well the easiest thing to do if you have technical questions is to call and talk to Will at the phone number on the website. As far as pricing goes it really depends on what all you are wanting to swap. You could change out just your low/high beam. Or you could change out the Hi beam only. Or you could change out all 4. In addition one of the best upgrades is just installing the upgraded wiring harness. The new one can carry much more current than the factory wiring. Now on the subject of HIDs, no these are not HID's. You can run zenon or any H4 style bulb. But all of these HID aftermarket kits are not legal to drive with. If you pay attention all of the plug and play HID kits are made in China. The reason for this is they dont care about the federal regulations, and in reality the kits are not a true HID. For those kits there is actually a $6000 fine per bulb and balast that the US government could fine you. Now that being said i know there are tons of HID kits out there and i have some on my 300ztt. Now i dont know about everone else but i didnt want to purchase some of the HID projectors, and then have to mod everything up. Have to make a fiberglass shroud to make a clean install and still spend alot of time and money. I am replacing all 4 of the actual lights in the front of the car. The new housings will allow me to run any H4 style bulb which is the most widely used bulb type. I am upgrading my factory wiring harness that will carry more current SAFTLY for the higher wattage bulbs AND it is from a highly reputable company here in the US where if i have any problems they will take care of me. My order ended up being around $350 shipped. When it arrives i will be able to replace everything and have a much better lighting solution for the TA. If you want to see the product go to the website and go under the Hella section, and Headlight upgrades. It will explain to you some of the details on the page. The product you need is the 150mm. Ignore the pricing on the page because it is not the right price. Each of the new conversion lights is around $60 not the 200 something it says on the site. That is why i said just call and speak to Will and he will steer you in the right direction.

Matt

01-20-2009, 08:59 PM	#14
98legendws6 Staging Lane Trader Rating: 0 Join Date: Nov 2008 Location: Thomasville, NC Posts: 61	Well the easiest thing to do if you have technical questions is to call and talk to Will at the phone number on the website. As far as pricing goes it really depends on what all you are wanting to swap. You could change out just your low/high beam. Or you could change out the Hi beam only. Or you could change out all 4. In addition one of the best upgrades is just installing the upgraded wiring harness. The new one can carry much more current than the factory wiring. Now on the subject of HIDs, no these are not HID's. You can run zenon or any H4 style bulb. But all of these HID aftermarket kits are not legal to drive with. If you pay attention all of the plug and play HID kits are made in China. The reason for this is they dont care about the federal regulations, and in reality the kits are not a true HID. For those kits there is actually a $6000 fine per bulb and balast that the US government could fine you. Now that being said i know there are tons of HID kits out there and i have some on my 300ztt. Now i dont know about everone else but i didnt want to purchase some of the HID projectors, and then have to mod everything up. Have to make a fiberglass shroud to make a clean install and still spend alot of time and money. I am replacing all 4 of the actual lights in the front of the car. The new housings will allow me to run any H4 style bulb which is the most widely used bulb type. I am upgrading my factory wiring harness that will carry more current SAFTLY for the higher wattage bulbs AND it is from a highly reputable company here in the US where if i have any problems they will take care of me. My order ended up being around $350 shipped. When it arrives i will be able to replace everything and have a much better lighting solution for the TA. If you want to see the product go to the website and go under the Hella section, and Headlight upgrades. It will explain to you some of the details on the page. The product you need is the 150mm. Ignore the pricing on the page because it is not the right price. Each of the new conversion lights is around $60 not the 200 something it says on the site. That is why i said just call and speak to Will and he will steer you in the right direction. Matt Last edited by 98legendws6; 01-20-2009 at 09:06 PM..