Some of you may remember my LED LT1 tail lights that I made. I did them because i could not find any Camaro Tail Lights that i liked better than LT1 style, but they werent modern enough for me.
well same goes for the headlights. there are the projectors on ebay, but they are all ricey with the white LEDs and halos. I decided to retrofit projectors into my catfish eyes, but using C6 projectors.
These are just the start, im currently waiting for the resin to set up that will seal the proctor cups into the assembly, then ill do the high beams, then ill work on the front to make it look pretty.
EDIT: I added new pics from doing the other headlight. this is the start to a how-to.
This was the source of the pojectors and HIDs, C6 headlights:
The projectors removed:
I cut out the mount only for the headlight portion and threw away the high beams mount:
heres where i cut on the camaro headlight:
Post cutting:
With the projector mount pressure fit:
And the high beam projector directly bolted and siliconed into the housing:
Here is the headlight mount with it sealed in place. I used clear casting resin:
Now see my next reply for the next steps, which have already been done on the other side.