LS1TECH - View Single Post

Dragkid1917 · 02-10-2009, 02:27 PM

my 233/239 cam fuckin flew at the track. I went an 11.53, while lifting (was in first round of a bracket race), while banging the rev limiter between the 2-3 shift because the tranny was garbage. I had 100% stock heads, a stock throttle body, stock LS1 intake, stock ud pulley and no EWP. It only put down 374 on the dyno, but if I can run an 11.53 on a lift (went like 113mph that run, the previous run I went a 59' because i spun like a mofo but also had 118.8 mph) then id say that cam works damn well and makes more power than all of those other ones.

And about the sound..... (my frend added in the music) but here's the clip

http://videos.streetfire.net/video/T...ORY_136380.htm

02-10-2009, 02:27 PM	#45
Dragkid1917 9 Second Club Trader Rating: 2 Join Date: Jul 2007 Location: new Jersey Posts: 844	my 233/239 cam fuckin flew at the track. I went an 11.53, while lifting (was in first round of a bracket race), while banging the rev limiter between the 2-3 shift because the tranny was garbage. I had 100% stock heads, a stock throttle body, stock LS1 intake, stock ud pulley and no EWP. It only put down 374 on the dyno, but if I can run an 11.53 on a lift (went like 113mph that run, the previous run I went a 59' because i spun like a mofo but also had 118.8 mph) then id say that cam works damn well and makes more power than all of those other ones. And about the sound..... (my frend added in the music) but here's the clip http://videos.streetfire.net/video/T...ORY_136380.htm __________________ 99 T/A Under the knife 10.9x or bust- 85 MM mas,Ram Air,Lid,Ported Fast 92/92,Fast Rails 12 bolt 3.73's,TSP 233/239,Hooker 1.75 LT's,ORY,LM1 !Egr,!Air,160 Thermo,Yank PT4000,SVO 38LB injectors. Flt Stage 5, 4' Alum DS. BMR Trakpak, LCA's,Relo brakets,Dragbar,Panhard,Subframe's, Custom loop. QA1's in all 4. 300# fronts. ARP everything,Rings,Bearings,Lifters,11:1 compression. Old setup -11.539@ 118.82 1.649 60' 1969 z28 - 406SBC 9.77 @ 135.8 (1.413 60')