I ruined alot of flat bar.. about 3ft trying to get an accurate mount made. 1/8" off fouls it and makes it a trash peice. The mount itself is being made from Aluminum. Should resist rust quite well unlike bare steel! Aluminum can't be unbent like steel can. the aluminum flatbar will just snap if you try to unbend it more than a few degrees.
__________________ Current Ride
1997 Z28, Black, A4, TTop 5.7L Retrofitted E46 HID Projectors.
Flowmaster Exhaust, SLP UltraZ Ramair Hood w/airbox
XM SatRad, Kenwood HU/Amp. K&N High Flow Airfilter.
BMR Strut Tower Brace, Subframe Connectors.
UMI Rear Lower Control Arms + Panhard Rod My Camaro Page - Updated 9/24/05 |