[Nova5]

Tape failed to hold against silly human tugging on the 8ga power wire to get a little more slack.
So now its zip tied to the passenger side hood stop bracket. I may end up moving the drivers side to the same not so nice location Or just find a way to tie it up in that void i have it in.


Built the wiring harness last night. Nice little fuse buss with a 8ga wire to provide it power for anything i may later add. relays triggered from the low beam headlight 12v wire. used a set of vampire taps to bite into it and gain the switch source that way. The passenger light is supplied power by a 16ga wire running in the same loom as the 8ga supply.


Installed and fully loomed.



And if its not one thing its another.. I now have to replace my battery tray as its front hold lip is busted off.