Quote:
Originally Posted by tim99ws6  I just finished doing the DEI setup as well.
Like previously mentioned, soaking the wrap really makes a big difference. An added and probably the biggest benefit is being wet it makes the wrap much more pliable. Also when it dries, it really snugs down to the piping.
I did the DEI heat spray coating, then wrapped EVERYTHING. I wrapped my 6.0 manifolds, my KYTurbo crossover pipes, and my 5" downpipe. It really came out looking excellent.
I'll have the car at the gathering this weekend in ATL if you want to check it out. |
Another thing to mention is that the cross over was wrapped before we got it by red83 and when we took the old wrap off, the tubing was practically spotless, some very minor surface rust on the welds but the mild steel tubing was spotless.