LS1TECH - View Single Post

Jeff@TotalPerformanceEng · 06-25-2009, 07:57 PM

Thanks for the emails guys..

Were are very serious about this. I spent over an hour on the phone with Callies today wrapping up the details of the motors. We will be using their product quite heavily. So dont think your gonna get a bunch of probe pistons, or PAC rods. We'll leave that for the hack shop next door to us.

Keep the emails coming

BTW Guys, We have an 800sqft room inside our shop that were converting in to a pool hall/lounge. We're also installing a blackjack table..

We think were gonna start playing blackjack after test-n-tune and midnight mayhem events..

Get me wasted, and I might start bettin motors..

06-25-2009, 07:57 PM	#6
Jeff@TotalPerformanceEng FormerVendor Trader Rating: 6 Join Date: Mar 2006 Location: "Sin City" Las Vegas Posts: 618	Thanks for the emails guys.. Were are very serious about this. I spent over an hour on the phone with Callies today wrapping up the details of the motors. We will be using their product quite heavily. So dont think your gonna get a bunch of probe pistons, or PAC rods. We'll leave that for the hack shop next door to us. Keep the emails coming BTW Guys, We have an 800sqft room inside our shop that were converting in to a pool hall/lounge. We're also installing a blackjack table.. We think were gonna start playing blackjack after test-n-tune and midnight mayhem events.. Get me wasted, and I might start bettin motors..