Since you haven't purchased a stall just yet, I would look into something that will work well with nitrous.
Take a look at our
interface controller to pull some timing while spraying the 100 shot.
Replacing a fuel pump is never a bad idea. If you're even thinking about doing it, don't hesitate.
Take a look at our
all-out kit. It has everything to make a kit complete (minus a few convenience amenities). If you have any questions as to why a certain item is a good idea or what it does, please feel free to ask.
Nick
Quote:
Originally Posted by Swift_01_z-28  Okay well I have a bolt-on 01 z28 still on stock stall and tune. I am planning on adding some 3.73s and a stall and some spray.
My first question is, do I need a specific type of stall converter for nitrous, or will just a regular Yank 4k work?
Second, I know you have to tune the car for nitrous, but is there anyway to keep my car where it will still run great even off the juice? Like possibly a hand-held tuner that can save custom tunes?
Also, i have heard that if you go over a 100 shot, that you need to replace your fuel pump, I wasn't planning higher than a 100, but I may just replace it anyway. What do ya'll think, and would you suggest a walbro 255lph, or something else?
What all do I need for a complete nitrous setup? I know I need a window switch, a WOT switch, a bottle pressure gauge, i want a remote bottle opener, remote bottle heater, and of course the bottle and the jets, but what am I missing?
i am wanting to order a kit, or maybe just put one together, that can just be installed and away i go.
I am wanting to get this as my next mod, and I am saving money as we speak, so any info would be awesome guys. Thanks. |