LS1TECH - View Single Post

MetalAuthority · 07-03-2009, 07:24 PM

just finished my install, or so i thought. I got a fuel and nitrous leak still to take care of, the nitrous being a pin hole is size leak between the nitrous solenoid and purge. Want to get my purge working for sure before i worry about taking it off to fix though. I have it wired correctly according to the schematics that came with it, one thing though is shows to tap into the wire coming off the WOT switch to the nitrous arming switch. So all I did was put the two wires together and crimped on the connetor to hook it into the switch. when i hit the purge button, nothing works, no clicks or nothing. im assuming my wot is good as when i press it i can hear a change in the pressure from the leak. where should i start checking?

07-03-2009, 07:24 PM	#1
MetalAuthority Staging Lane Trader Rating: 1 Join Date: May 2009 Posts: 56	Purge Not Working just finished my install, or so i thought. I got a fuel and nitrous leak still to take care of, the nitrous being a pin hole is size leak between the nitrous solenoid and purge. Want to get my purge working for sure before i worry about taking it off to fix though. I have it wired correctly according to the schematics that came with it, one thing though is shows to tap into the wire coming off the WOT switch to the nitrous arming switch. So all I did was put the two wires together and crimped on the connetor to hook it into the switch. when i hit the purge button, nothing works, no clicks or nothing. im assuming my wot is good as when i press it i can hear a change in the pressure from the leak. where should i start checking?