[02T/A-WS6]

I have the relays mounted in the engine compartment behind the computer. I didnt open the hood or anything though. I just rinsed the car off. But I also had the problem with the solenoid before I washed the car. Everything is heat shrinked minus the relays. I taped both the nitrous and purge relays together and havent not had a problem with the main nitrous system relay.

Also on a side note...I have the ash tray switchs and the nitrous rocker switch will sometimes stay dimly lite with the switch in the off position. I unplugged the keyed 12v and it still stayed on. I have the keyed 12v and ground spliced into the same wires/ground for the purge, nitrous, and heater but the nitrous one is that only one that stays dimly lite. The microedge still says standby when this happens and says armed once I turn it on so it seems to be operating correctly. So I'm not sure whats goin on here.