LS1TECH - View Single Post

svshawk03 · 07-15-2009, 04:54 PM

I would change the fuel pump. if its an aftermarket pump go back to stock. I have put in 4 pumps in the past 6 months all have been walbro. I went back to stock. Also check the rubber or plastic lines on the fuel pump to make sure they are not split. If they are split replace them with a fuel injection hose for each one. hopefully this will help. Make sure to check the fuel pump relay when you change the pump out.

07-15-2009, 04:54 PM	#2
svshawk03 Teching In Trader Rating: 0 Join Date: Sep 2008 Location: Centerville, Va. Posts: 21	I would change the fuel pump. if its an aftermarket pump go back to stock. I have put in 4 pumps in the past 6 months all have been walbro. I went back to stock. Also check the rubber or plastic lines on the fuel pump to make sure they are not split. If they are split replace them with a fuel injection hose for each one. hopefully this will help. Make sure to check the fuel pump relay when you change the pump out. Last edited by svshawk03; 07-16-2009 at 03:36 PM..