Quote:
Originally Posted by moge11  He would would be SO much HAPPIER with a Holley and an Airgap then he would be with TPI...As in he would make about 50 more horsepower above 5K. | the stock vortec computer will only rev to 5900
a tune port set up on these motors ( vortec )will torque almost like a BB or diesel but will suffer on the top end probally fall on its face about 4800
the lt1 intake should be a good all around intake for this also but it all depends what this is going in. if this is for a heavy vehicle, I'd stroke it with a hot cam 2500 stall with a lt1 intake or stealth ram.
__________________
96 Trans Am M6 w/street twin,fake ws.6 : hood from harwood, late model 17" aluminum wheels and sway bars, pcms 4 less computer, LE2 heads, ported intake, Bauer custom cam, RPM built! stock cube bottom end, Canton road race oil pan, FLP headers w/ crapmaster exhaust, 10bolt w,3.73's and Auburn pro diff
"give a firefighter a rubber hammer and he could break an anvil" |