Adrian should have explained a little. You need to run the times of the club you are requesting. I.e. if you request the "12 Second Club" you need to have run 12's. Etc, etc... Any questions just ask.
David
__________________ 1998 SS NBM, Build #114, A3 My SS My SS Site on fquick.com Sponsored by Excessive AutoSports, Sioux Falls, SD
I'm from Iowa i ran a 12.75, 12.76 and the mph was 106 & 108 - i usually run it in the 1/8th and i had the chance to run it in the 1/4 at a different track with my new ET streets, boy do those make a difference! my 60's are usually 1.86 and 1.87
I really wanted to get to the 1/4 before winter hits up here, the plan over winter is to get a Speed inc S15 cam and PRC 5.3L heads from TSP.
Sign me up Thanks!
__________________ "02 Electron Blue C5 Corvette"
Sitting on bench ready to go on this winter
TEA 5.3L heads 1.5 porting 2.02/1.55, SI6 cam, Harland Sharp roller rockers, FAST 92/LS2 90 TB, Spec 3+ & Yella Terra ULW flywheel, DTE strut rearend brace, & lots of other Speed inc & SLP stuff.
yeah i posted a while ago but we'll see what happens this time with the new membership thingy going on...
__________________
1998 A4 Z28 Hardtop...Click Below for my Fquick (under construction) Coated Long Tube Headers, Catted Y Pipe, 373 Gears, HP Tuners, SLP Loudmouth Catback, Fast Toys Ram Air Kit, SLP Smooth Bellow, High Flow Lid, KYB AGX Shocks, CME
i entered i am just weighting to see if they allow me to join.Mikey
Well Mikey, as long as you can prove you have run what you submitted for I'll approve it. 6 posts? Any time slips? Video? Have you posted your runs? If not and no signature with anything to prove the run, it will be hard to approve it.
You need to run what you submit for.
David
__________________ 1998 SS NBM, Build #114, A3 My SS My SS Site on fquick.com Sponsored by Excessive AutoSports, Sioux Falls, SD
i will see if i can post them if not i will see if i can scan them"i have never done it i ran at atco last night and a cecil county drag way last friday.I will see what i can do.Thanks mike
Also i have like 20 time slips that will show my 12 sec runs i will see if i can scan them and shoot me your e-mail and i will send them to u.Thanks mikey
Mikey. You should be able to post them here or PM them to me. I'm sure that the rest of the guys would like to see you car, build, time slips also. PM me if you have any questions.
David
__________________ 1998 SS NBM, Build #114, A3 My SS My SS Site on fquick.com Sponsored by Excessive AutoSports, Sioux Falls, SD
Navy David, i just realized my title wasn't updated, then i read the thingy again, i'll send you my time slip tomorrow
__________________ "02 Electron Blue C5 Corvette"
Sitting on bench ready to go on this winter
TEA 5.3L heads 1.5 porting 2.02/1.55, SI6 cam, Harland Sharp roller rockers, FAST 92/LS2 90 TB, Spec 3+ & Yella Terra ULW flywheel, DTE strut rearend brace, & lots of other Speed inc & SLP stuff.
12.98 @ 104.37
Last Saturday at Memphis Motorsports Park I ran 12.98 @ 104.37 with a 1.797 60' in 94 Z28 LT1. Mods consist of CAI, 1.6 roller tips, Pacesetter Headers, xpipe dumped at rear through dynomax bullets, 3000 stall, A4, 3.73 gears, aluminum elbow, and PCMforless mail order tune.
Here is the video.
12.98 @ 104.37
Last Saturday at Memphis Motorsports Park I ran 12.98 @ 104.37 with a 1.797 60' in 94 Z28 LT1. Mods consist of CAI, 1.6 roller tips, Pacesetter Headers, xpipe dumped at rear through dynomax bullets, 3000 stall, A4, 3.73 gears, aluminum elbow, and PCMforless mail order tune.
Here is the video.
__________________ Mods: GT2-3 cam,patriot gold springs, Harland rockers, American racing headers and catted mids, Corsa exhaust, Ligenfelter CAI, pedder suspension, 385HP/380TQ tuned by tom, 12.18 at 114.35 PB with a 1.78 60' ft.
So - you want the infamous LS1tech 12 Second Club" next to your name 
Thanks!
Best 12.59 at 107.63mph 60ft 1.78 on street tires
[/IMG]
