Quote:
Originally Posted by slow95z  you'll need both motor and tranny mounts solid to keep from busting the tranny case cause if one is permenantly mounted and the other can shift, then the only weak point left is the bellhousing. i would go poly/poly on them. it will keep vibrations down and still keep the everything where it shift instead of break. |
NEVER run a solid tranny mount unless you have a tubular chassis and a 2 motor plates, 1 in the front and a midmount.
__________________
Caring Impaired
The difference between the Pope and a politician, the Pope only expects you to kiss his ring. |