[BakaN20]

Here is what comes with the kit:



Actual Bottle:


Compared to a 10lb bottle:


Anti-reversion valve. Prevents nitrous entering the NANO kit, but allows the NANO kit to enter nitrous bottle:


Mounts, allows you to mount through the bottle brackets:


How it would look:



A temperature sticker, when its green, good to go, red, no go.


Sticker on my bottle:


A couple stickers:


Instruction Manual, pretty easy to understand:


Open/Close handle


Connects to the top, has a seal on it:


How it looks together:


Fill Port. This is where you get it filled, make sure you don't fill it anywhere else or it might mess up the regulator:


Braided SS line, the npt side connects to the NANO and the AN side to the nitrous.


Anything that needs to be screwed on has thread sealant on it already:


Bottle and SS line together:



Your bottle should have an accessory port on it. Some do, some don't so make sure you check, nano sells a universal valve that you can replace yours if you don't have a port: