Cammed and Blown! EDIT and Sprayed :)
Itll be a little bit for the vids... turns out the rear that JUST got put in last week under warranty couldnt handle a part throttle 3500 rpm 2nd gear pull...
its at the dealer for Diff number 2!! Itll be a little bit for the vids... turns out the rear that JUST got put in last week under warranty couldnt handle a part throttle 3500 rpm 2nd gear pull...
its at the dealer for Diff number 2!!The Best V8 Stories One Small Block at Time

EDIT: and of course, if im having too much problems I will just go back to the 2.8" until I get meth/8 rib setup. Also, by "Pending Install" i mean that the kit is ready to install now but I would like to get it cammed etc like our friend Justin did here and do it all in 1 shot. Though, looking at it sit on my work bench is getting harder and harder.
Last edited by deedubb; Sep 17, 2009 at 06:42 PM.
overall the car is an animal, first and second gear is pretty useless but to let it lug down in the 1200RPM range and you would never know there was a cam in it. As you can see from the first pull there was alot to be desired from the base tune. Vid to come shortly!
ive already mentioned it
BUT 500 is the only goal he has and he likes his exhaust and the blower whine so its a win win
8PSI should put him right on target.
wanna go? Sometimes turbos arent what ppl want. Take a look at how just about every new 2010 camaro you see is getting the TVS! Theres about 100 ways to get to a goal and at the end of the day theres only one person that has to be happy about it



What TB did you use and I'm guessing Magnuson sells a 90mm snout?
