Aeroforce Scan Gauge (Video Demo)
Aeroforce Scan Gauge (Video Demo) Well, I thought i'd take a video to show some of you what you're missing out on. 
For those of you that don't know, this is the Aeroforce Scan gauge. It plugs into the OBDII port and can pretty much read everything from the computer.
I'm talking like a jackass in this.. I know..
http://www.youtube.com/watch?v=T8Eh2gosfhs
Definitely the best gauge i've ever come across so far. The performance mode measures 0-60, 1/4 mile, so much other stuff too. Can't wait to try that out
For those of you that don't know, this is the Aeroforce Scan gauge. It plugs into the OBDII port and can pretty much read everything from the computer.I'm talking like a jackass in this.. I know..
http://www.youtube.com/watch?v=T8Eh2gosfhs
Definitely the best gauge i've ever come across so far. The performance mode measures 0-60, 1/4 mile, so much other stuff too. Can't wait to try that out
I've always wanted one of those, but have always had a hard time getting over the price. (I'm not sure how I can justify my 2 widebands though...)
Let us know how accurate the 0-60 & Quarter mile times are.
Also, do you know if you can read speed in KM/H?
Let us know how accurate the 0-60 & Quarter mile times are.
Also, do you know if you can read speed in KM/H?
Nice little walk thru. I cant believe more people dont have these installed. Everyone complains about the stock gauges bein like dummy gauges & this lets you actually see what the PCM is reading.
Does that trans temp reading look accurate? What should the tranny be around? There's 3 different trans temp options and one didn't work.. so i'm just trying to see if the one I have chosen now works correctly. I dont know. Mine is a 6-speed so there isnt any tranny temp sensors that I know of. I know my Aeroforce is a older unit but if I set it to tranny temp is just pops up some negative number & never changes, so I know its not reading it.
I believe for some of the parameters you have to add extra wiring to the stock sensors. But again I'm not 100% up to speed on the newer versions.
I believe for some of the parameters you have to add extra wiring to the stock sensors. But again I'm not 100% up to speed on the newer versions.
I'm not sure.. next time I'm fooling with the gauge i'll see if there's a setting. Go to the manufacturer website and see if there's an edition for KMH.
I know! I didn't even know I didn't have a 160* thermostat until I saw my coolant temp was like 194 Does that trans temp reading look accurate? What should the tranny be around? There's 3 different trans temp options and one didn't work.. so i'm just trying to see if the one I have chosen now works correctly.
I know! I didn't even know I didn't have a 160* thermostat until I saw my coolant temp was like 194
Does that trans temp reading look accurate? What should the tranny be around? There's 3 different trans temp options and one didn't work.. so i'm just trying to see if the one I have chosen now works correctly.And just because your temps got u to 194 isn't indicative of what thermostat you have. A 160* T-stat just means it will open at 160*.
But 194 does sound hot for just sitting in the driveway...
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Mine stays at 202* once fully warmed up & can creep to 206* while driving. But never goes over 212* even in the hottest part of summer.
It's plugged into the OBD port, and ONLY the OBD port. It did come with an extra 3 wire harness, that way you could add it to your own switched/ignition power source. But it turns on when I turn the car to "On," and it turns off once I open the door (like the radio does).
It's plugged into the OBD port, and ONLY the OBD port. It did come with an extra 3 wire harness, that way you could add it to your own switched/ignition power source. But it turns on when I turn the car to "On," and it turns off once I open the door (like the radio does).
I'll look into getting myself one for x-mas. Looking into getting LTs, exhaust, ls6 intake(this one might be later) and frost tune sometime soon to get it out of the stock world
Nice video, would love to have one but would have to find the funds first. Looks like $250 for the single, $400 for the dual.
Originally Posted by AeroforceTech
Standard General Motors including Duramax diesel (pre 2006) gauge packages. Check application guide linked above for your exact model before ordering. Unlike previous generation Interceptor gauges, these current versions are universal for all GM vehicles. The user can select which parameters to view as well as customize the power up screen.
Be sure to check application guide before ordering!!!
Gauges come configured with a black face and black bezel with an included white face and polished silver bezel. Additional optional hardware such as silver face or brushed aluminum bezel can be found on our Accessories page.
**Be sure to check out our sensor kits which of course are compatible with these gauges. These sensors simply connect to the analog inputs on the back of the gauge. Click here for more information!
PT Series Interceptor gauge fits most pre-2007 GM vehicles, CN series for newer CAN bus vehicles. See application guide for exact information:
Check applicaton guide before ordering.
$249-single/$399-dual
non-US or non-Canadian residents please email us before ordering for shipping information.
Be sure to check application guide before ordering!!!
Gauges come configured with a black face and black bezel with an included white face and polished silver bezel. Additional optional hardware such as silver face or brushed aluminum bezel can be found on our Accessories page.
**Be sure to check out our sensor kits which of course are compatible with these gauges. These sensors simply connect to the analog inputs on the back of the gauge. Click here for more information!
PT Series Interceptor gauge fits most pre-2007 GM vehicles, CN series for newer CAN bus vehicles. See application guide for exact information:
Check applicaton guide before ordering.
$249-single/$399-dual
non-US or non-Canadian residents please email us before ordering for shipping information.
Yeah that's the coolest part. It comes with a black ring, an aluminum ring, a black face, and a white face. And you can swap any of them out in a few seconds.
