Hurst short shifters please come in. New short chrome stick installed.
Thread Starter
TECH Enthusiast
iTrader: (2)
Joined: Mar 2009
Posts: 508
Likes: 0
From: Chattanooga, TN
Hurst short shifters please come in. New short chrome stick installed. Hey all hurst shifter people I was wondering if any of yall have seen or used this short stick with your hurst billet plus shifter base. He's the picture of the short stick.
http://cgi.ebay.com/ebaymotors/Hurst...Q5fAccessories
Update here's how it looks installed. The main reason I wanted this different stick was so that I could keep my shifter ball($85) that I got for the Hurst billet shifter and the new stick is shorter. The only thing that was not right in the auction was that this stick does not lean rearwards it leans frontwards due to where the grooves are on the bottom of the stick. An a side note the picture in the ebay aution has a weld right about the grooves on the stick but when I received it, it is not welded it's on solid piece like the stock billet chrome stick. But I will say I have great clearance and everthing with all gears, if I would have problem with any gear it will be in reverse but it's called grabbing the ball tight or palm shifting. I like the setup and oh yea it's shorter. Now that being said I have 5 pictures for yall. 1st is difference in the lengh of the stick, 2nd stock billet plus stick in neutral, 3rd new shorter stick in neutral, 4th new shorter stick in 1st gear and the 5th one is my shifter ball. An now I'm not no f'n georgia bulldog fan. Do any of yall think yall are going to try this stick? If not I have an stock hurst long stick with black hurst ball for sale with gears and hurst engraved on the ball for sale.
http://cgi.ebay.com/ebaymotors/Hurst...Q5fAccessories
Update here's how it looks installed. The main reason I wanted this different stick was so that I could keep my shifter ball($85) that I got for the Hurst billet shifter and the new stick is shorter. The only thing that was not right in the auction was that this stick does not lean rearwards it leans frontwards due to where the grooves are on the bottom of the stick. An a side note the picture in the ebay aution has a weld right about the grooves on the stick but when I received it, it is not welded it's on solid piece like the stock billet chrome stick. But I will say I have great clearance and everthing with all gears, if I would have problem with any gear it will be in reverse but it's called grabbing the ball tight or palm shifting. I like the setup and oh yea it's shorter. Now that being said I have 5 pictures for yall. 1st is difference in the lengh of the stick, 2nd stock billet plus stick in neutral, 3rd new shorter stick in neutral, 4th new shorter stick in 1st gear and the 5th one is my shifter ball. An now I'm not no f'n georgia bulldog fan. Do any of yall think yall are going to try this stick? If not I have an stock hurst long stick with black hurst ball for sale with gears and hurst engraved on the ball for sale.
Last edited by thewholefnshow1; Nov 3, 2009 at 11:51 AM.
TECH Addict
Joined: Nov 2005
Posts: 2,379
Likes: 2
I just used a WS6Store short stick "slightly" modified with a sledge hammer heh. I angled it to the driver's side a bit and combined with the C6 Shift **** puts it just high enough to keep a coffee in the center console but be right where my arm height is relative to the shifter.
Thread Starter
TECH Enthusiast
iTrader: (2)
Joined: Mar 2009
Posts: 508
Likes: 0
From: Chattanooga, TN
I will. I should get the car back tomorrow or friday. I'll take a picture of them side by side lengh wise and take w pictures of them in the car before and after install. More comments welcome. An has anyone got one of these yet or used it?
TECH Regular
Joined: Oct 2006
Posts: 404
Likes: 1
From: Harvester Mo.
I have the Hurst Billit Plus shifter and i ordered the chrome stick from Hurst. It doesn't look like yours though. Mine is round not flat. It says Hurst on it and I have a white **** from an old 4-speed Hurst Compatition Plus linkage that screwed right on. I think it's pretty cool....
Trending Topics
Thread Starter
TECH Enthusiast
iTrader: (2)
Joined: Mar 2009
Posts: 508
Likes: 0
From: Chattanooga, TN
I have the Hurst Billit Plus shifter and i ordered the chrome stick from Hurst. It doesn't look like yours though. Mine is round not flat. It says Hurst on it and I have a white **** from an old 4-speed Hurst Compatition Plus linkage that screwed right on. I think it's pretty cool....
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Thread Starter
TECH Enthusiast
iTrader: (2)
Joined: Mar 2009
Posts: 508
Likes: 0
From: Chattanooga, TN
I love the stick cause it's shorter first off and it I got to keep my speed dawg ball. Nothing wrong with the high pivot stick but something shorter was great for me.
Looks good bro!.......not sure if I could hang w/my shifter being any more forward tho?
I went w/TNA Motorsports stick, It's like the WS6 store strait stick but comes w/a spacer block & positions the stick in center of console.....Very happy w/it!
I went w/TNA Motorsports stick, It's like the WS6 store strait stick but comes w/a spacer block & positions the stick in center of console.....Very happy w/it!
I just used a WS6Store short stick "slightly" modified with a sledge hammer heh. I angled it to the driver's side a bit and combined with the C6 Shift **** puts it just high enough to keep a coffee in the center console but be right where my arm height is relative to the shifter.
Thread Starter
TECH Enthusiast
iTrader: (2)
Joined: Mar 2009
Posts: 508
Likes: 0
From: Chattanooga, TN
Pictures: 1st is 1st gear overhead
2nd is 1st gear side shot zoomed in
3rd is 2nd gear side shot not zoomed
4th is 5th gear overhead
5th is 6th gear overhead
6th is neutral far
7th is neutral zoomed
If you need anymore pictures at a certain angle let me know and I will get them cause I think I'm going to park the car tomorrow. Having to much fun and wasting gas. hehe LOL
Thread Starter
TECH Enthusiast
iTrader: (2)
Joined: Mar 2009
Posts: 508
Likes: 0
From: Chattanooga, TN
LOL No problem for the pictures just trying to help a F-body brother out. I gave you the overhead shots so that you maybe but your shifter in that gear and see how much shorter it is but I will tell you it don't fell like I have to throw shifter to the back seat to put it in 6th gear. The main reason I got it cause it was shorter and so I could keep my $85 shifter ****. Cause you know the stock shifter **** is bigger and I think all the aftermarket shifter ***** are OE threaded. If you want a bigger shifter **** you can go to www.lokar.com An they have 2.25 inch shifter ***** with adatper's so you can install it on the chrome stick. I think the black hurst ball that comes with it is to small IMO. Well good luck and hope you get one.