[CMNTMXR57]

[quote]Originally posted by Torquepimp:
<strong>i did not have to bleed mine. mine is perfect. i had too much in there as it was. so when i was putting my tranny back on i connected it when it was still under pressure a little just enough to allow the fitting to go on. but mine was a prefilled one. when i was done i just opened the clutch master and the excess came out.</strong><hr></blockquote>

That's due to the fitting I described above. It's a "quick-connect" style that allows the line to be disconnected without injecting air into the line.