[2001 SOM WS6 69 GTO]

Adam, I see where you have a concern here. Look real careful at the picture that you supplied and you will notice that my tool is over three times the thickness of the Napa, ect tool. Also look real close as you will see that they used the stock rocker arm bolt which as I also found out the hard way is a big NO NO.

To answer your question about being 100% sure about the studs that I purchase to be heat treated, YES YES and YES. I too had the same concern about bolts breaking so I went way out of my way talking to many suppliers to make sure I indeed was buying heat treated studs.

I will 100% assure you Adam that you will not bend or break any portion of my tool and once you use it you will be glad you got it. I have sold several of these tool and not one person had any problems with it on an LS1 application. I also have done many cam/spring swaps for people and have used the exact same tool over and over on both single and double springs applications with no problems I am sure GTO69Judge will jump in here as well and assure you that is a great tool and you have nothing to worry about with my tool.

Hopes this helps your out some. If you want to talk about this more I am more then willing to talk to you over the phone if you would like, just PM me and we will take it off line.

Thanks,
Tim