LS1TECH - View Single Post

3rdgenguy · 08-16-2005, 09:23 PM

just a little 1983 Z28 with some better parts then the car came with. 355 flat top pistons crane energizer 480 lift 228 duration @.050 lift singel pattern flat tappet cam. comp pushrods, crane valve springs ,edelbrock performer intake holley mechanical fuel pump holley pressure regulator. ARP fasteners .msd 6al box, edelbrock headers , holley sniper nitrous system(up too 150 shot). Band M holeshot 300 stall i overhauled the 700r4 with the b and m master overhaul kit. then in the back i have the 7.625 Borg and warrner Hd (ya right) diff useing some richmond 4.10 gears and MT ET Drags

just some of the pictures

08-16-2005, 09:23 PM	#71
3rdgenguy 12 Second Club Trader Rating: 1 Join Date: Jul 2005 Location: toledo ohio Posts: 201	just a little 1983 Z28 with some better parts then the car came with. 355 flat top pistons crane energizer 480 lift 228 duration @.050 lift singel pattern flat tappet cam. comp pushrods, crane valve springs ,edelbrock performer intake holley mechanical fuel pump holley pressure regulator. ARP fasteners .msd 6al box, edelbrock headers , holley sniper nitrous system(up too 150 shot). Band M holeshot 300 stall i overhauled the 700r4 with the b and m master overhaul kit. then in the back i have the 7.625 Borg and warrner Hd (ya right) diff useing some richmond 4.10 gears and MT ET Drags just some of the pictures __________________ http://designerflooringhouston.com/o...rdgenguy-1.jpg Mods: Chevy 2 bolt 350 .030 over comp pushrods crane springs crane cam (it makes a lot of noise) Holley HP carb Msd 6Al box Richmond 4.10 gear holley sniper 150 shot bla bla bla bla built only because i have no kids http://www.clicksmilies.com/s1106/au...smiley-028.gif