Quote:
|
Originally Posted by JasonWW The little metal shield that cuts the beam in half goes on the bottom. All of the light that passes through will bounce of the top of the reflector, over the shield and then go downward to the road.
Here's one of my pics with the projector in the correct orientation. Shield is on the bottom.
When the light goes through the lens on the end it will get flipped. So you want the light to go out the top, over the shield, so that it will be flipped and light up the lower road area. No light (or very little light) should be seen above the windshield area. Stand in front of your car at night about 25 or 50 ft away. Now bend down to where your head would be if you were driving past yourself. Do the lights get in your eye? Or have a friend drive by you in the opposite direction. Can he see OK when passing?
Here are some pics that might help. Note the light beam is labeled #1 |
yeaph you are right! i have them upside down!
today i will fix them, and tonigth will see how it looks!
ths man!
