[DROPTAWP]

Dustin,

The wiring diagrams shown are: Type A and C, Type B and Systems with factory control modules. If you are putting the 530t into an F-body with the drivers side factory 'express down' feature, then you wire the 530t up as according to the latter ( systems with factory control modules ). The factory control module controls the drivers express down function. You have to connect the 530t between the window motor and the control module. The best way to make sure you are making the connection between the module and the motor is to make the connections as close to the motor as possible, just as I have pointed out in my instrucitons.

No, I didn't use any relays. The realy would be needed only if you are using your keyless entry remote to roll the windows up/down remotely. I haven't used that feature ( yet! ).

Good luck and let me know how you make out with your install.