Quote:
|
Originally Posted by kaos_ Would the SeaFoam for automatic tranny work well or is there something else that's better for flushing it? I saw it at NAPA and was curious if it was a good investment or not. |
i'd be nervous of the tranny flush...i have no experience with it, but the tranny is something i personally wouldn't mess with. i have confidence in our engines but not in the automatic trannies
Quote:
|
Originally Posted by RMC_SS_LDO Any ideas as to why it would idle crappy in closed-loop after Seafoam? I didn't dork with anything other than the vacuum line. |
1.) your IAC censor or MAF sensor may be dirty from the smoke produced in the cylinder banks from the seafoam
2.) your plugs are very dirty from the seafoam
3.) did you put seafoam in your oil? if you did, your oil may be a lot thicker than usual, making more effort to pump oil at idle.
may be any one of the three, or even a combination.