LS1TECH - View Single Post

cwaldt · 12-04-2006, 01:35 PM

I couldn't see how much interference there would be if the HVAC was left in place. I do know that with the proper K-member that the Hooker Headers 2455 will fit with the HVAC still in place with a little massaging on the HVAC box. I didn't have any problems with the firewall after I went with the BMR Fabrication K-member though.

I'd go with the 2455's and just check for the fitment and massage what needed to be, with the HVAC still in there.

12-04-2006, 01:35 PM	#6
cwaldt TECH Regular Trader Rating: 4 Join Date: Jan 2006 Location: Kings Mtn, NC Posts: 429	I couldn't see how much interference there would be if the HVAC was left in place. I do know that with the proper K-member that the Hooker Headers 2455 will fit with the HVAC still in place with a little massaging on the HVAC box. I didn't have any problems with the firewall after I went with the BMR Fabrication K-member though. I'd go with the 2455's and just check for the fitment and massage what needed to be, with the HVAC still in there. __________________ 1995 Z-28 454 BBC 650 HP,Built 700R4 Trans with 3500 RPM Stall BMR Fabrication K-Member, Adj. LCA's, Adj. Panhard Bar, UMI Weld in LCA Relocation brackets, Jegster Shortened Adj. Torgue Arm 15x4 SportStars with MT Sportsman Fronts, 15x10 SportStars with 325/50R/15 MT Drag Radials Moser 9" Rear End Narrowed 3" per side from Exotic Performance Plus. Last edited by cwaldt; 12-04-2006 at 03:20 PM..