Since you don't have the HVAC in there I'd put the HVAC delete plate in and then just use a hammer to make room instead of cutting on the headers. You won't be able to see it from the engine bay or from inside the car.
__________________
1995 Z-28 454 BBC 650 HP,Built 700R4 Trans with 3500 RPM Stall
BMR Fabrication K-Member, Adj. LCA's, Adj. Panhard Bar, UMI Weld in LCA Relocation brackets, Jegster Shortened Adj. Torgue Arm
15x4 SportStars with MT Sportsman Fronts, 15x10 SportStars with 325/50R/15 MT Drag Radials
Moser 9" Rear End Narrowed 3" per side from Exotic Performance Plus.
Last edited by cwaldt; 12-05-2006 at 02:52 PM..
|