LS1TECH - View Single Post

cwaldt · 12-15-2006, 07:39 AM

I got my HVAC plate installed last night. There is alot of interference at the bottom of the plate and with primary # 8. I did a little bit of the hammer mod and everything worked out perfect.

Nobody will be able to see if because what I hammered on is under the dash and I'm putting my vacuum reserver canister on my HVAC plate so that'll hide it in the engine bay.

The only other option would be to reroute primary #8, but that just seems like too much extra work for me.

12-15-2006, 07:39 AM	#12
cwaldt TECH Regular Trader Rating: 4 Join Date: Jan 2006 Location: Kings Mtn, NC Posts: 429	I got my HVAC plate installed last night. There is alot of interference at the bottom of the plate and with primary # 8. I did a little bit of the hammer mod and everything worked out perfect. Nobody will be able to see if because what I hammered on is under the dash and I'm putting my vacuum reserver canister on my HVAC plate so that'll hide it in the engine bay. The only other option would be to reroute primary #8, but that just seems like too much extra work for me. __________________ 1995 Z-28 454 BBC 650 HP,Built 700R4 Trans with 3500 RPM Stall BMR Fabrication K-Member, Adj. LCA's, Adj. Panhard Bar, UMI Weld in LCA Relocation brackets, Jegster Shortened Adj. Torgue Arm 15x4 SportStars with MT Sportsman Fronts, 15x10 SportStars with 325/50R/15 MT Drag Radials Moser 9" Rear End Narrowed 3" per side from Exotic Performance Plus.