Quote:
|
Originally Posted by silverbandit0996 could someone please make a diagram for a wet kit with a FPSS, the nitrous outlet window switch with an arming switch and an led? |
the LED's only have 2 wires...12v and ground.....
just connect one to the wire you are wantng to monitor and the other to the needed supply
I.E. if you are wanting to know when the solenoids are activated the one wire for the LED will go on the power wire (pin 87) to the solenoid and the other will go to ground.
Also make sure you use the correct resistor for the LED you are going to use