Schurters LT1

iTrader: (2)

i am in the works of getting all the parts need so i can do this right the first time.

-What TB are out there for me to pick from?
-intake elbows will not make me an elbow for the 58mm, so?
-willson 90mm and will this work with the stock IAC/TPS ?

-90* or 100* elbow and who's make ?
-did you drill the intake your self for the vac lines ??

did you will the elbow any ?? to help it fit under a WS6 hood ??

Speed Density

iTrader: (38)

Aaron @ Intake Elbows wont make a twin bore TB elbow? He made my old one.

Wilson Elbow and Accufab TB will work, your screw in IAC will work but you need the billet adapter. You will need a mustang TPS and have to splice into your harness.

Drill the back of the elbow for vaccum.

Tony.

FASTFATBOY

iTrader: (23)

DO a search for turbo_6 look at his setup, e mail him.



David

Schurters LT1

iTrader: (2)

need more feed back guys thanks

jakesz28

iTrader: (9)

http://www.sullivanperformance.com/Y.../tbadapter.htm

I'm thinking of this. But I may just fab my own up.

Speed Density

iTrader: (38)

There is no way that would clear the water neck housing on the intake. That would be a pain in the ***.

socal

iTrader: (1)

accell/lingenfelter made one alone time ago but dont know if they still do its in an old catalog i have

Schurters LT1

iTrader: (2)

there realy needs to be a sticky on diff way to do this......

-PEPE-

iTrader: (10)

That sucks if Aron quit making the elbow because I need one myself, personally I like the fabbed look on a modified engine. I'm running an ASM monoblade and the intakeelbows would have been perfect.

FASTFATBOY

iTrader: (23)

Yeh I contacted Aaron a few weeks ago for a buddy who wants one like mine. He no longer makes a LT1 elbow.

I saw a post on CZ28.com a while back that a nitrous company put up. They had fabbed an elbow VERY similar to Aarons deal and were selling them(I think) It was on a Victor Jr with the spray bars plumbed just under the carb flange.


David

Speed Density

iTrader: (38)

I seriously cant believe aaron stopped making them.

I just sold my old one for $200 too, there are lots of guys that can make them though, its just sheetmetal and a 4150 flange.

Tony.

Schurters LT1

iTrader: (2)

i emailed Aron a few times and its a no go ..i even said i would give him more money to make it...

Schurters LT1

iTrader: (2)

if you no anyone will to make it......i am looking

jakesz28

iTrader: (9)

I have a friend that I just talked to about welding one up for me. So if I get caught back up at work I can make a couple while I'm making mine.

ttrimz208

Nitros Daves put it up. Don't know if they are making them though. http://web.camaross.com/forums/showthread.php?t=519034

Aaron is only a ten minute drive from me. Did he say why he isn't making the elbow anymore?

Schurters LT1

iTrader: (2)

i email Ndave, still wating to here back....Aaron said no time to make it....

otherwhitemeat

iTrader: (3)

Nitrous Dave's just make me one...I like it......will need a new hood though....of at least a hole in the hood.

Schurters LT1

iTrader: (2)

i email him nothing back ....would a ram air hood work???

flyinZ

iTrader: (15)

Single Plane owners, how is the driveability on the street, with them? Is part-throttle tuning a pain? What type of problems do you notice, compared to the factory LTx intake? Throttle response?

Ponyhntr

iTrader: (9)

subscribing....