LS1TECH - View Single Post - LS1 head combustion chamber CC volume vs CR

bigeller · 11-01-2003, 10:06 PM

Interesting post.. I was just about to post a a question regarding this..

I have an LQ9 in my Z.. Is there anyway to do the Head CC volume vs Compression Ratio for the 6.0 HO engine.. The pistons are flat tops ala LS1.. The deck height is the same as an LS1.. The stroke is the same..Just a bigger bore.. The stock heads heads are 71.06cc..

I have a set of 70cc LS6 #243 casting heads with stock valve sizes that will go on soon, and I'm trying to figure out how much I could mill these heads with my TSP 228 228 .588 .588 cam straight up. I don't want the PV issues.. I know that with the stock #317 heads(71.06cc) the compression is 10.0:1.. I want to run between 10.8:1 - 11.0:1..

Thanks for the info.

11-01-2003, 10:06 PM	#9
bigeller TECH Regular Trader Rating: 2 Join Date: Dec 2001 Location: Iowa Posts: 459	Interesting post.. I was just about to post a a question regarding this.. I have an LQ9 in my Z.. Is there anyway to do the Head CC volume vs Compression Ratio for the 6.0 HO engine.. The pistons are flat tops ala LS1.. The deck height is the same as an LS1.. The stroke is the same..Just a bigger bore.. The stock heads heads are 71.06cc.. I have a set of 70cc LS6 #243 casting heads with stock valve sizes that will go on soon, and I'm trying to figure out how much I could mill these heads with my TSP 228 228 .588 .588 cam straight up. I don't want the PV issues.. I know that with the stock #317 heads(71.06cc) the compression is 10.0:1.. I want to run between 10.8:1 - 11.0:1.. Thanks for the info.