Quote:
Originally Posted by Blackbirdws6  Parts/Materials:
Infiniti FX35/45 Bi-Xenon projectors w/ Clear Lens (pair)
Hella Gen 3 OEM ballasts (pair)
Philips 85122+ HID D2S lamps (pair)
H4 Wiring Harness with solenoid wires (positively switched)
Plexi-Glass Sheets 1/10th inch thick
Lexan Sheet
Garden lamps used for projector shrouds
Plaster of Paris
Stock Headlamp
Black High Temp Paint
Misc. wire connectors and Elec. Tape |
Red, do you have just a basic wiring diagram of this, not entirely sure how you wired the projectors high beam movable shield to the current wiring setup.
Blue, where did you buy these, and what thickness would you recommend the lexan be? Green, what kind of garden lamps are you talking about exactly, and are the rings sold separately or do you have to buy a whole kit of lamps? Any pictures of what the actual lamps look like? I might have some in my garage.
Bold, where can Plaster or Paris be purchased.
Quote:
Originally Posted by Blackbirdws6 I first need a mold so I cut open the stock sealed beam housing and removed the lamp inside. |
How exactly did you manage to do this? I've messed around with the stock housing, and have been afraid of attempting this with fear of shattering both the glass lens and glass housing.