[Jason Haines @ LPE]

The wires are 48" long so you might be able to make it into the driver compartment but it would probably be tight. I don't know if any customers have mounted them inside the vehicle.

The other problem would be that the connectors and the box are fairly large so it would take a big hole in the firewall to pass the wires/connectors or box.

We do include the pinouts for the harness in the instructions for people that want to rewire the harness but you need to be very careful about lengthening the wires because the circuits are fairly sensitive to resistance changes. You also need to be very careful how you mount the box and route the wires so that you don't pick up noise (for example, do not route the launch controller harnesses along side your spark plug wires if you have remote mounted your spark plug coils).


Jason

Originally Posted by bigsticksupra

Are the wires long enough to reach the coil packs and back into the interior glove box area? Where do people usually mount the box? I want to be able to adjust it without getting out of the car and popping the hood everytime.