For the first time in 5 years we've been on the market we will have to increase our prices. The reason for this is the continuous decrease in the USD/EUR exchange rate and EUR is the currency in which we pay our leather suppliers. Just so you know, 30% of the cost of our boots is material. Their prices have gone up almost twice in the last 2 years.
In order to provide you with the top quality shift boots, we cannot settle for inferior quality leathers to make them with, however their current pricing has made it near impossible to provide our shift boots at the prices they are now. We want to keep our prices low, however, and we've come up with the absolute minimum increase, only directly compensating the increases in costs we incur.
Therefore, all prices will go up by $9 starting this Sunday. So all those of you who have been holding off making a purchase, this is the last call before the increase...
We will try to make the discount codes appear a bit more often than before (to somewhat compensate the increase) however we only want to publish discount codes if we have something to show above the code, ie. some interesting pictures. So, the more pictures we get, the more often a discount code can be released. AND we pay $5 for each picture we decide to use (it has to be high-res and very good quality to be considered). Hint, hint...
Meanwhile, CARBON-FIBER VINYL is the theme of the day today. It's a synthetic material (vinyl-based) with the carbon-fiber structure embossed on it. It definitely looks sporty, definitely automotive and is the base of some very fine looking shift boots:
perforated leather is a very nice, sporty addition to any interior:
It combines very well with our finishing types:
1)Stripes (here - BLACK PERFORATED LEATHER WITH SILVER CARBON FIBER STRIPES... I know they look white, but they are silver CF for sure, the camera flash makes them look whitish):
2) Piping (light gray piping on perforated black leather in a C5 Vette - notice how well it matches with the seats - though they are a completely different color, the same pattern of perforations makes them really come together!):
another sample of perforated leather and piping:
Here's the new code: 56ST4G86SI0 - valid through Friday, June 20th!
I've got a few questions.....First, Do you offer Black/Red Carbon Fiber? Second, can you do custom embroidery or stitching...kinda like the one in my car now:
The "Pontiac Racing"
Thanks and let me know??
-Justin
__________________ 1998 WS7 T/A M6, SLP: Lid, Line Lock, Loudmouth Exhaust w/ORY, Skip Shift, Pacesetter LT Headers, 80mm BBK Throttle Body, Centerforce LS6 Clutch, Eaton Detroit TrueTrac Differential, MAC Diff.Carrier Bearing Girdle, 3:73 Gears, Spohn Control Arms, Hotchkis Adj PHB, H&R Lowering Sp.Springs, NX 150 Shot Direct Port, Lots More Mods...Check FQuick Page!
Well, we only have either black or red carbon fiber, it's not like the design you've shown on your picture, but I think it would look good next to it, wouldn't clash. Here's a link to pictures of our carbon fiber vinyls:
something less tricked-out but just as cool this time. Two-tone boots. With either different (here - white) thread on pics 1-3 and matching on 4 and 5:
1.
2.
3.
4.
5.
Here's the new code: 5656EV4FE8P - valid through Wednesday, July 16th!
very cool and all but i've tried e-mailing you guys multiple times with no response, tried pming you on here with no response. I've purchased from you before want to know if you can do something else and possibly purchase something new, but am timid to the fact due that no one can even answer a question for me.
very cool and all but i've tried e-mailing you guys multiple times with no response, tried pming you on here with no response. I've purchased from you before want to know if you can do something else and possibly purchase something new, but am timid to the fact due that no one can even answer a question for me.
Hi,
well, email issues are not new and do happen, we always reply to all emails we receive but we cannot make sure our replies reach your mailboxes... But we always send a reply so you might want to check your spam filter for our mail.
Also, I have *NEVER* got a PM from you on this or any other forum. I've PMed you to ask you how can I be of assistance. Hopefully we can take it from there.
The reason for this is the continuous decrease in the USD/EUR exchange rate and EUR is the currency in which we pay our leather suppliers. Just so you know, 30% of the cost of our boots is material. Their prices have gone up almost twice in the last 2 years.
