- stall converter
- bolting a th400 on my ls1 have some questions.
- 4L80E vs 6L90E
- Trans Output Yoke lenght??
- Bolt-on Autos: Chime in please
- Converter valve in valvebody
- 4l60e to th400 swap into '98 f body questions
- tci flexplate to vigilante converter clearence
- auto roll races?
- NO gears please help!!!
- no Reverse
- Have you done the M6 to A4 conversion??? Come on in
- Transmission Problem, please help
- Adjusting shift pressure with a switch?
- T56 to 4L60E or 80E
- A special thanks to Circle D!!!!!!!
- poor little 60e
- Figured my converter out but have a question
- TCI Full Reverse Manual Valve Body--- No reverse,1st,2nd,3rd, or 4th now
- tci flywheel yank converter
- 4l80e shifter question
- knocking coming from 4l60e bellhousing
- TC 1-2 Lockup clutch gone?
- pt4000 vs ss4000 for ME?
- FLT question
- From T-56 to TH400 questions.......
- Need HELP tranny problem????
- help choose converter size please
- Tranny help?
- 4L80E TOSS port pic. Does this look right?
- Eliminating PWM
- Finally got 3200 stall and shift kit installed
- What will suck the MPG out of an A4 the quickest?
- Car will not always downshift when WOT?
- 97 4L60E advice..
- Will this cooler be enough to run standalone?
- LS1 Alum Driveshaft in a V6?
- Swapping tranny stuff between two F-body ... Got some questions
- SS4000 and 3.90s?
- Cost to convert From M6 to Th350-400
- 4l60e tailhousing bolt circle?
- Dope style cooler mount with a ram air twist
- can a stock 4L80 take 1,000hp stock?
- whats the right stall
- Shift Kits
- Cracked converter!!!
- converter ?
- What to do th400, t56, built 4l60E
- GM Transmission seal conditioner, any builders advice?
- FB Performance Transmissions?
- Flywheel bolts
- Torque Converter
- Help me pick a Stall
- deep pan or short pan?
- manual valve body plese help!!
- torque converter, stall questions, not the same questions as most.
- Car wont start, Wont enguage in Park
- C5 a4
- Slap shifter
- v6 auto drive shaft an v6 manual drive shaft
- little help with trans converter
- Messed up Tranny A4?
- 130000 miles trany
- would a bad rearend hurt an a4?
- 700r4 to th350
- 200 mph
- 700r4 lock-up issue
- 4l60e builders inside please..
- anyone know of a transbrake kit for 4l60e?
- Manual to Automatic Z06 Conversion
- Little help if possible
- yank 2800 stall chatters?
- 4L80E/TH400 Dimension info
- canyon carving an auto
- atf what kind?
- 4l80 converter the same as th400?
- Extreme Tranny Swap
- another FLT Level 3 getting the job done
- whats this for?
- guys with higher stalls i need your help!!!
- Problem with Vigilante Converter
- Torque coverter refreshed or re-stalled
- Video: From a dig- SS3800/Performabuilt Level 2
- PT4400 Guys come in please, quick question!
- So what happens when the rear sprague breaks?
- TH350 kickdown
- 4l60e gm gasket re-useable ?
- early 6.0 an tranny ?s
- TCI SSF 3500 lockup clutch
- 2000 Monte Carlo SS
- 4l65-e hold up to 500rwhp?
- 4L60E speedo pickup
- Connecting Older VSS to 99+ Harness
- 4l60e tired or wrong
- what size cooler lines? -6 or -8? doesnt matter?
- installing valve body with TB... too hard?
- Converter problem PLEASE HELP!!!!!
- 200Metric or 2004R
- 4L60E in DD/parts chaser needs upgrade
- trap rpm
- 2-3 shift problem 4l60E
- tranny leak?? what do you think??
- Automatic conversion
- General trans specs
- Busted tailhousing?
- Torque Converter for LS1 Impala
- Impala 1970: TH 350 long or short neck?
- 4L60e Problem
- 4l60e
- 4L60e wont shift out of first
- T56 to th400
- YANKs post election November SALE
- Tranny/Rear End feels weird - Look inside
- pics of trans for ice
- average cost to rebuild
- Upgrade from Yank SS3600??
- Shift by RPM instead of MPH
- tranny cooler/location
- Plz help 4l60e ????
- Help, it seems that 2nd is my only forward gear
- Sonnax Servo
- TCI converters???
- 1st to 2nd shift issue 98 Camaro
- installing aftermarket automatic shifter
- Should I Rebuild?
- lock up at wot
- Yank 3000
- vig 3200 and spray
- Problem... 2nd to 3rd no shift...
- trans slip questions.
- Questions about bypassing stock trans cooler
- 29.5 vs 28 in tire
- Converter Screwed up did it take the whole tranny with it?
- 6 speed to 350 question
- What's going on with my Tranny??!?!?
- pt3800
- Cross Member
- Restall a Vig3600 to 4000 vs. Yank SS4000
- gear vendors
- Tranny questions
- TCI TH400 shield
- Converter shutter, narrowing it down...
- What TC???
- anybody know the cooler port thread pitch? (4l60e)
- 6 bolt tailhousing 4L60e converter ?'s
- Fuddle stall
- What should line pressure be?
- Bolt on A4 shift points
- Which transmission to choose? (Performabuilt,RPM,FLT)
- 4L80E in a 98-02 F Body Question
- A new and more affordable 4l80e adapter harness
- Experiencing Intermittent Lockup
- 2002 auto vs 2010 auto questions
- Extended Sale! Due To Overwhelming Response
- 4L80e acting strange on the dyno...need some ideas
- Listen guys....
- Finish Line Transmissions (FLT) Winter Holiday Sale With New Policies
- Trans dipstick has fluid spurting out?
- torque conv. not staying locked
- 1st to 2nd shift problem!
- FLT level 3 F-Body 9.87 @135+ 1.363 60ft.
- FLT 4l60e in the 9's with Video/Pic's
- Car idles up and powers when in gear...?
- P1870 transmission slipping code. converter won't lock.
- A4 to TH400 CROSSMEMBER
- Torque Arm Relocation
- L O N G T A I L th400 going in the camaro
- Tranny cooler
- 4L65E SWAP to TH400
- not shifting
- My 4L60 Carnage Pics!!
- fuddle 3600 chattering
- Transmission shifting problems, Help?
- GM transmission controller
- Burning 4th, Vette 94.
- Year update: FLT/Yank combo produces yet again!!!
- 4L60E Conversion Question
- shift kit question
- 6180e without transfer case question
- What rebuild kit to buy????
- Transmission Slipping
- Getting 3200 stall and shift kit installed very soon
- Flares going into third gear
- Thanks to Circle D converters!!!!
- Transmission Problem - Need Help
- tranny fluid ?
- '98 Z28 A4 Rattling noise, u joints or transmission problem?
- Any thoughts?
- sponsor built TH400
- TH-400 brake options and install synopsis
- 4l80e man. shift-which shift firmness size hole
- TH400 and a 4000rpm stall from FTI on the way
- i have a th350 conversion question ???
- Just dropped off the trans
- How much power am I losing
- Tranny Fluids?
- fastest radial tire cars in america
- Torque Management?
- At WOT shifts will bounce of rev. limiter???
- 3200 Vig and Shift Kit Question
- Speed Inc Flexplate.
- How to tell if converter is being commanded to lockup or unlock
- Question for my girls Mustang
- another 4l60E or T56
- 94 4l80 to 5.3
- Anyone that know this?
- 4L60E a couple of quick questions, not technical
- Help tcc unlock
- procharged 4l80e
- vent tube puking tranny fluid?!?
- Quick shift kit question
- new trans installed.. car wont start
- Help!
- Converter not stalling properly?
- ONE WEEK LEFT FTI Oct converter specials
- Drove Home today
- TCI 399753 flywheel kit all thats needed to run a turbo 400?
- 4L80E Transmission Vaccum Modulator Kit
- Everyones favorite question...
- th350
- need basic 4L60e tips please
- accidently into reverse while driving
- rebuilt 4l60e slipping
- 4l80e guys what setting to put TA at?
- glide
- Will the 6l80 take FI?
- what does a slipping trans feel like?
- FLT 4L60E GOES 9.25 @ 146 IN JR's C5 TODAY!
- TH-350 Swap
- Where to install temp sensor on TH400?
- P0748 code lost my gears
- 4l60e problem
- Anyone have experience with 4L60E and aftermarket paddle shifter?
- s10 4L60 question
- Ok Now This Is Just Getting Effin Annoying!
- Which 4L60e will work in my 98 Z28?
- ---->GLENN AND PAVEL FROM KELLY CHEVROLET BLEW A PERFORMABUILT TRANSMISSION IN 6mi!!!
- 4L80E w/ stock 10 bolts....question for you
- What 4l60e's fit the ls1 Trans ams.
- Tranny Coolers
- Help! Trans won't downshift at WOT and TC won't lock up
- rebuilt 4l60e acting weird help!!!!!!!!
- Trans Mount
- Transgo 4l80e man. shift kit buyers
- Won't shift
- Speed Inc. SFI approved flexplate?
- shift knob?
- Flexplate
- Who can do a torque converter cut and clean - how much???
- Reuse or send off?