Throttle Cable Bracket for ls2 intake?
#2
TECH Addict
iTrader: (15)
Join Date: Sep 2002
Location: Gainesville, GA
Posts: 2,538
Likes: 0
Received 0 Likes
on
0 Posts
I have a homemade bracket that I welded up. It bolts into the front pass. side intake bolt. I used a TB cable bracket off of my old LS6 manifold. Takes about 5 minutes to fab up.
#6
TECH Senior Member
iTrader: (1)
Join Date: Nov 2001
Location: Waco, TX
Posts: 6,449
Likes: 0
Received 0 Likes
on
0 Posts
My LS2 intake & FAST TB should be here today. I'm looking at maybe doing this sometime this weekend.
Nate, I will need some fuel rails in the future. Hint hint. For now we're going to splice my LS1 rails, but I want some higher flowing ones in the not too distant future.
Nate, I will need some fuel rails in the future. Hint hint. For now we're going to splice my LS1 rails, but I want some higher flowing ones in the not too distant future.
#7
11 Second Club
iTrader: (1)
Join Date: Sep 2003
Location: Fayettenam, North Cakalki
Posts: 1,252
Likes: 0
Received 0 Likes
on
0 Posts
Got my intake today Ordered it yesterday. KJ must be putting next day air on these suckers lol cause I am in NC!
I would like to see pics of bracketts from those of you who have already fabbed them. I still need a TB so I have not messed with it yet.
Brad
I would like to see pics of bracketts from those of you who have already fabbed them. I still need a TB so I have not messed with it yet.
Brad
Trending Topics
#8
11 Second Club
iTrader: (1)
Join Date: Sep 2003
Location: Fayettenam, North Cakalki
Posts: 1,252
Likes: 0
Received 0 Likes
on
0 Posts
Pics
Well I was bored yesterday so I hacked up my worthless LS1 intake and stole the TC brackett off of it. Here are some pics of it installed on the LS2.
It looks kinda shitty right now but I am not done. This should give ya a good Idea on what to do tho.
That grey stuff is good ole JB Weld. That sucker is on there GOOD!
Brad
It looks kinda shitty right now but I am not done. This should give ya a good Idea on what to do tho.
That grey stuff is good ole JB Weld. That sucker is on there GOOD!
Brad
#11
TECH Addict
iTrader: (15)
Join Date: Sep 2002
Location: Gainesville, GA
Posts: 2,538
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Nasty N8
This will be in our kit. Full billet bracket.
Nate
Nate
#12
FormerVendor
iTrader: (33)
Join Date: Feb 2002
Location: Lake in the Hills, IL
Posts: 5,052
Likes: 0
Received 0 Likes
on
0 Posts
It will include the right O-rings for the injectors rails and the cable bracket. I will also have a kit with the intake and TB.
Should be done this week then off to get polished. If you want to place orders please give me a call.
Nate
Should be done this week then off to get polished. If you want to place orders please give me a call.
Nate
#13
TECH Veteran
iTrader: (6)
Join Date: Apr 2002
Location: Jacksonville, FL
Posts: 4,924
Likes: 0
Received 0 Likes
on
0 Posts
Nate, will those fuel rails work w/ the Multec II injectors? I'm looking into running an LS2 intake and FAST TB on my truck, but I would need a return-style setup that would keep my Multec II "truck" injectors.
#14
FormerVendor
iTrader: (33)
Join Date: Feb 2002
Location: Lake in the Hills, IL
Posts: 5,052
Likes: 0
Received 0 Likes
on
0 Posts
No it is too cheap and easy to change them out to a standard style injector. Most anyone needing to upgrade that far needs to upgrade the injector as well. Sorry man
Go to a TPIS TB not the FAST it is much higher quality. Better bearings smoother operation and better finish.
Nate
Go to a TPIS TB not the FAST it is much higher quality. Better bearings smoother operation and better finish.
Nate
#15
8 Second Club
iTrader: (18)
Join Date: Oct 2002
Location: Waterloo, Ontario
Posts: 2,609
Likes: 0
Received 0 Likes
on
0 Posts
Nate will u be making those rails with some sort of adapter to just plug into the factory fuel lines? It looks very nice-also please don't forget about us C5 guys-we need a plug for the 90MM TB too!
#17
TECH Regular
iTrader: (4)
Join Date: Nov 2001
Location: Fort Worth, Tx
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Nasty N8
This will be in our kit. Full billet bracket.
Nate
Nate
Last edited by CamaroSS_2002; 11-04-2004 at 10:15 AM.
#18
FormerVendor
iTrader: (33)
Join Date: Feb 2002
Location: Lake in the Hills, IL
Posts: 5,052
Likes: 0
Received 0 Likes
on
0 Posts
Vortech- I can add the fittings and braided hose to make them work with your factory lines. What plug are you refering to? I have billet 90mm TB's for the C5 as well.
bmfcamaro- Your return e-mail does not work? The TPIS TB is $475+you stock core.
CamaroSS_2002- I should have something complete this week and off to get polished. I am working on the pricing today I will get back to you guys.
I am taking a list of how needs what so let me know. We can get your orders in so there will be no delay as it is done.
Thanks Nate
bmfcamaro- Your return e-mail does not work? The TPIS TB is $475+you stock core.
CamaroSS_2002- I should have something complete this week and off to get polished. I am working on the pricing today I will get back to you guys.
I am taking a list of how needs what so let me know. We can get your orders in so there will be no delay as it is done.
Thanks Nate
Last edited by Nasty N8; 11-04-2004 at 11:50 AM.