 | | 
03-05-2008, 04:03 PM
|
#1 | | Head Fabricator
Join Date: Jan 2002 Location: At the track
Posts: 4,301
|  Help Wanted
I am looking for some more help in our shop.
You need to be able to read a tape measure.
Be able to work long hours.
Be able to work in a high stress environment.
Be able to go racing during the week or on weekends.
Be a quick learner.
Have an imagination.
Have some tools and willing to buy more.
Willing to hustle and keep up with the work ethic.
The pay is very good for the right person.
Madman & Co Racing Inc is an equal opportunity employer and offender.
__________________ www.madmanandcoracing.com
225-673-3533 PSJ the only person to ever put more mileage on his car on the dyno than on the street!!!   Worlds Fastest Torque Arm F-body - 7.43 @ 188 Late Model Racecraft Quickest and Fastest LS1 on stock suspension | 
|  | |
03-05-2008, 04:38 PM
|
#2 | | TECH Junkie
Join Date: Nov 2001 Location: Houston,Tx
Posts: 3,534
|
Would you hire me. I can do it all. I just need 8 weeks off around the end of the month for Benjamin.
Amber
__________________
02 SOM Z28 M6
8.69@156MPH Worlds Quickest and fastest N/A LS1 M6 T56 | 
| | |
03-05-2008, 04:45 PM
|
#3 | | Head Fabricator
Join Date: Jan 2002 Location: At the track
Posts: 4,301
|
Sure but Joe would kill me.
__________________ www.madmanandcoracing.com
225-673-3533 PSJ the only person to ever put more mileage on his car on the dyno than on the street!!! Worlds Fastest Torque Arm F-body - 7.43 @ 188 Late Model Racecraft Quickest and Fastest LS1 on stock suspension | |
| | |
03-05-2008, 07:00 PM
|
#4 | | 10 Second Club
Join Date: Apr 2004 Location: Woodstown,NJ
Posts: 1,771
|
id be very interested if you were closer to me 
-brandon | |
| | |
03-06-2008, 01:06 PM
|
#5 | | TECH Junkie
Join Date: Nov 2001 Location: Houston,Tx
Posts: 3,534
|
He would love it. He could be around you all the time
Amber
__________________
02 SOM Z28 M6
8.69@156MPH Worlds Quickest and fastest N/A LS1 M6 T56 | |
| | |
03-06-2008, 06:29 PM
|
#6 | | TECH Apprentice
Join Date: May 2005 Location: NW Houston
Posts: 323
|
Quote:
Originally Posted by Six Speeds Inc.  Would you hire me. I can do it all. I just need 8 weeks off around the end of the month for Benjamin.
Amber | Are you sure you can read a tape measure
__________________ SUZANNE
2000 Maroon Z28 M6 (cam/bolt-ons)
1989 Mustang Coupe M6 (stock) 
2004 Yamaha R1 | |
| | |
03-13-2008, 11:10 PM
|
#7 | | TECH Resident
Join Date: Sep 2007 Location: Warwick, Rhode Island for college, but go home to Ansonia, Connecticut once in a while
Posts: 754
|
i wish you were closer =(
if your still looking in october when i get my assoc. degree i will def consider makin a move =) | |
| | |
03-13-2008, 11:52 PM
|
#8 | | 12 Second Club
Join Date: Mar 2003 Location: Allen, MI...close to the middle of nowhere
Posts: 577
|
I am able to do all that and would love to work in such an environment, but making the commute from Montana would be a bit harsh. I guess for the right pay I could just move again.
__________________
Beater 98 Camaro M6 Black w/moon roof
370 Fe Block - 238/244 114 - Patriot 59cc II's - SPEC IV - TSP Rumbler - Hookers with Y - Lid - 275 Pirelli P Zero Nero - 315 GSD3's Torq Thrust II's
400 rwhp(M.D.) before 90/90, stock pulley & pump
Best ET:12.5929 Best MPH: 117.86 3690 lbs | |
| | |
03-14-2008, 04:56 PM
|
#9 | | TECH Apprentice
Join Date: Nov 2003 Location: Valdosta Ga
Posts: 300
|
I would be interested I am in south Georgia was in the Air Force for 6 year's as a mechanic and fuels technician. I would love this kind of opportunity give me a call if the offer is still open 1-229-251-9385
__________________
98 Trans Am, black, 3500 stall, lid, long tube's,off road y-pipe, cut out's, 150 shot NX dual stage, LS1 speed tunning, 255l fuel pump
2000 WS6 stock RIP | |
| | |
03-17-2008, 06:02 PM
|
#10 | | On The Tree
Join Date: Jan 2008 Location: Statesville,NC
Posts: 136
|
Once i get out of UTI, i will look back to here. | |
| | |
03-25-2008, 12:50 PM
|
#11 | | 12 Second Club
Join Date: Jan 2005 Location: In the big city of Houston and big state of Texas.
Posts: 293
|
Nice featured video on your website!! lol, Bring em all!! lol
__________________ If you really want some, Im "stock" come get ya some!!!  | |
| | |
03-28-2008, 01:50 PM
|
#12 | | TECH Resident
Join Date: May 2007
Posts: 794
|
Are you telling me there are no worthy little grunts hanging around your shop, the track, interest in working for you? No welding schools in your area? Surely you have a JVS in your town. Go interview the top five in the class. Most kids would give a nut to work at a race shop.
Jakes Dad | |
| | |
03-28-2008, 03:33 PM
|
#13 | | Head Fabricator
Join Date: Jan 2002 Location: At the track
Posts: 4,301
|
Quote:
Originally Posted by Jakes Dad Are you telling me there are no worthy little grunts hanging around your shop, the track, interest in working for you? No welding schools in your area? Surely you have a JVS in your town. Go interview the top five in the class. Most kids would give a nut to work at a race shop.
Jakes Dad |
Here are some of the quotes from the interviews!!!!
1. BEFORE even giving me his sales pitch etc. "What are you paying"( Mind you this is from a 19 year old guy who shows up in mommies BMW)
2. "What do you do here" (Another 19 year old who was too lazy to do some research on the shop)
3. "I am an underwater welder but I cant weld on dry land" ( 20 year old)
4. I ask what fabrication skills do you have. Response= " I fabricated all my suspension on my car." ( As he leaves the parking lot the torque arm falls off due to a faulty weld)
5. The best one so far!!!!
Guy= "What are you offering as a starting pay?"
Me= "Pay is based on experience, how much do you have?"
Guy= "None but I am a college student and my professor of business says you should pay me between 18.00 and 20.00 per hour as a training position."
Me= After getting up off the floor from the laughter I respond, "You are paying for college so in this instance I charge $26.00 per hour to teach you, so if I pay you $20.00 per hour then you still owe me $6.00 per hour."
So Jakes dad you can see I am still looking.
__________________ www.madmanandcoracing.com
225-673-3533 PSJ the only person to ever put more mileage on his car on the dyno than on the street!!! Worlds Fastest Torque Arm F-body - 7.43 @ 188 Late Model Racecraft Quickest and Fastest LS1 on stock suspension | |
| | |
03-28-2008, 04:19 PM
|
#14 | | TECH Resident
Join Date: May 2007
Posts: 794
|
Sorry for thinking. I understand your issues.
We can't find a lot tech that can pass a drug test and is still permitted to drive. If we find one of them the next questions is how many weeks off do I get?
I take full responsibility for your problems. It's my generation that had these kids. We spoiled them, gave them money to get the hell out of the house. Gave them money if they showed up for school.
Dogs are much easier to handle than kids. Even one that goes after a 2,000# plus bull, starts fights with the other two dogs. It's in it's last TIME OUT. About ready to put it's ass down. One day the bull will take this dog and flip it's 150# body up into the air. That will a day I have an extra   Jakes Dad - A dog smarter than it's owner!  | |
| | |
03-28-2008, 06:43 PM
|
#15 | | Launching!
Join Date: Apr 2006
Posts: 231
|
lol that is great stuff. :hmm: maybe i should email over my resume | |
| | |
03-28-2008, 07:47 PM
|
#16 | | Registered User
Join Date: Mar 2008
Posts: 12
|
MadMan,
After looking over your sight I could not find anywhere to put in an application, but I believe I am qualified to work for you. As a former Marine you can rest assured my work ethic is top notch. I was a QA inspector in charge of not only repairing, but ensuring the quality of repair on Avionics components and Harnesses. While working in a Machine shop I helped in the development of and building of Automated industrial equipment prior to my service with the Marine Corps. I have had experience running both a manual lathe as well as a manual 3 axis machine. In addition I am a car person, it is all i want to do.
If I missed some info on where to send my information please let me know, but as I said before I found no information on your site or in your post as to where to send a resume
Thank You
Steve | |
| | |
03-28-2008, 10:42 PM
|
#17 | | Head Fabricator
Join Date: Jan 2002 Location: At the track
Posts: 4,301
|
Send any resumes to madman.racing@hotmail.com
Please include a phone number so i can call and talk to a live person.
__________________ www.madmanandcoracing.com
225-673-3533 PSJ the only person to ever put more mileage on his car on the dyno than on the street!!! Worlds Fastest Torque Arm F-body - 7.43 @ 188 Late Model Racecraft Quickest and Fastest LS1 on stock suspension | |
| | |
03-28-2008, 10:54 PM
|
#18 | | Registered User
Join Date: Mar 2008
Posts: 12
|
cool deal thanks, is there a specific subject you would prefer in the email? and is there a specific program/file type you'd prefer? | |
| | |
03-29-2008, 05:44 PM
|
#19 | | modamarator/LS1Tech Sponsor
Join Date: Dec 2001 Location: Chi-town
Posts: 7,219
|
hey Brian I would move and work for you but i think it would turn into too much of a competition to see who can use the word fuck more often all day lol
__________________ Sean -- The Powder Pro Custom Powdercoating and Polishing www.thepowderpro.com Current SPECIALS: FREE SHIPPING on all calipers, $250 engine bay package! 98 custom Z28 street car-D1SC Procharger 9.84@139.5, 1.38 sixty foots 2006 Black Trailblazer SS, 2 wheel drive 2003 Artic Cat Sno Pro | |
| | |
03-29-2008, 06:19 PM
|
#20 | | Launching!
Join Date: Apr 2006
Posts: 231
|
Quote:
Originally Posted by MADMAN Send any resumes to
Please include a phone number so i can call and talk to a live person. | so ahh this means you have gotten resumes without phone numbers?  | |
| | | |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off | | |
| |  |
