WTB exhaust T/A 2001

simpleboy77 · 10-10-2008, 11:26 AM

Hi, i'm looking for complet exhaust. Cheapest as possible. Just need it to pass inspection. Can be the stock or mod, I dont realy care. I have LT's on. Cat or no cat, I can buy some. I can do adjustment easy. Let me know what you got.

Model, 2001 Firebird Trans Am WS6 whit LT's

I'm located in Gatineau, 5 min from Ottawa.

Spd-Kilz · 10-10-2008, 11:51 AM

Are you looking for "catback"? Or manifolds / Y / Cats etc.?

Also, is this permanent or temporary...ie. just to pass the test, and the put the LT's back on?

simpleboy77 · 10-10-2008, 04:55 PM

Only temporary. Once emision pass, I will but back the LT's.

Bassicaly, i'm looking for cat, Y and cat back. Headers can pass but LT's that dump right before the rear and and no cats = FAIL.

Spd-Kilz · 10-10-2008, 07:09 PM

I have stock manifolds / Y pipe w/ cats, but it won't work with the LT's.

I do not however have a stock catback.

For the "catback" why don't you U clamp on a single pipe that's 2.5" (or whatever the stock diameter is) to the Y pipe. Then turn it down before the axel. That can't cost more than $25.

I'm pretty sure that the exaust has to exit after the rear doors...nothing says out the back. Not 100% though.

simpleboy77 · 10-11-2008, 10:26 AM

Quote:

Originally Posted by Spd-Kilz

I'm pretty sure that the exaust has to exit after the rear doors...nothing says out the back.
Not 100% though.

That is my main concern. I still need to ask the safty guy about where the exhaust have to be.
I can just buy some cats

This what I will have :

I'm buying 1BadAzzWS6 T/A at the end of the month. I still have time to figure out what to do whit this.

I did not expect to have quick reply on this

Spd-Kilz · 10-12-2008, 12:00 AM

I don't think that you'll have any problem with the exhaust system itself...just the fact that there are no cats.

simpleboy77 · 10-21-2008, 08:26 AM

How much you want for your cats and Y ? I will cutom made the exhaust to fit the headers.

I live 5 min from Ottawa so pick up can be made.

Spd-Kilz · 10-21-2008, 06:29 PM

I'd let you borrow them, but I don't want you to modify them, which it sounds like you'd have to.

I have no interest in selling, sorry.

CAMAROZ28AQUINO · 10-22-2008, 05:47 PM

ive got a corsa catback for sale

simpleboy77 · 10-28-2008, 10:18 PM

Quote:

Originally Posted by CAMAROZ28AQUINO

ive got a corsa catback for sale

Oups, sorry. I was so busy about bringing my new toy I forgot to check my add. Now I got the car

.

Big problem is, I dont know if your catback will fit. The space left because of the moser 9'' is very tight. I let you know this weekend if temperature is good. I will take some mesure.

How much you want for ?

SladeX · 10-28-2008, 10:59 PM

I've got cats sitting at home in the garage along with a Z28 muffler with tips still attached. I'd have to pick it up next time I'm in Toronto if you are interested. Everything else would need some jury rigging to create the catback but that would just need, the cats, temp welded to a y and intermediate. At least you'd have the major components. I currently live in Ottawa so next time I head home which is probably the week of the 15th, I can grab them for you. Also I'm practically giving it away the pieces, just spot me a tank of gas for my troubles?

simpleboy77 · 10-29-2008, 12:23 PM

I found some cats and I think I will do the exhaust the right way for safty and leave it like this. What I have on the car is too loud for me so I'm planning to go dual 3'' and go under the axle. I just hope it will past safty.