Aftermarket gauges using 99 LS1 data line?

[Old Kid]

Are there aftermarket or some gauge package that will run off a 99 SS wiring harness (serial port?) The stock gauge pod will not fit in my 66 Rambler dash but I'm using most of the Camaro wiring harness throughout the car.

[the_merv]

You can modify the Harness pretty easily to get them other signals that you need.. I had to do it with my swap, and a bunch of other things too..

[Old Kid]

Thanks "The Merv" but what I want to do is use the factory serial port to power aftermarket gauges. I looked at reconfiguring a stock 99 Camaro gauge cluster but most of it is printed circuits. Anyone?

[RE AND CHERYL]

Never heard of someone trying it or seen it. You'd probably need a computer geek to break it down and see if it's even possible. I would personally use aftermarket gauges as they would be much more accurate.

Re'

[bczee]

Well.. not sure if it can. but as RE' said. That Oil Pressure gauge is not very accurate on the 99' cluster. It been called a dump gauge!. So one more reason not to use it.