I there such a thing as pre bent fuel lines. It would need to work in a 86 monte carlo for a return style system. If there is such a product, where would I find it?
If your asking for Pre-Bent fuel line from the LSx fuel rail to your 86 monte.. I don't think so.. most people just fab and bend up what they need. You can get Pre-Bent lines for the rest of the car.. like from tank to the front, but you are on your own to get it from there to the fuel rail and return line.
Thats totally fine. I just need the ones that run the length of the car. I should be able to fab up the rest of it no prob. And idea on where I can find these?
Location: Stationed: Clovis, NM From: Grand Rapids, MI
Posts: 506
If i could make a suggestion; Summit sells 25ft coils of aluminum 3/8" fuel line for $19. This stuff can be manipulated by hand and is very workable. To flare to 37* AN you can get the flare tool from them for $30. Tube nuts and sleeves are $2 a pair. The 37* flare will allow you to connect the tube nut directly to an AN fitting. This may be a cheaper route plus you will get a tool out of it.
Also you should have a segment of soft line between the frame/body and engine to account for engine movement
__________________ 1971 Olds Cutlass Supreme
Cammed, Stalled, & Pressurized 6.0/80E My Build Thread Picture Album
Pre bent fuel lines? 
