Anyone need a swap radiator?

[loweredd]

I have my 16x31 dual pass radiator with fans and A/C condensor mounted on it for sale if anyone is interested. Inlet and outlet on passenger side, with Derale 4000 cfm fans installed, mounting pins welded to the bottom, condensor mounted on the front, and a -4AN bung welded on the passenger side for the steam line.

I have WAY too much into it, but am going to use my stock radiator now that I chopped my core support all to heck.

I will throw out a price of $650 for the whole thing. OBO.

[deuce4935]

How good does this radiator fit the stock caprice core support?

[pist0lpete]

That is a killer deal.

[loweredd]

It will fit inside where the A/C condenser goes. I was going to place it there for turbo clearance, but am ditching the turbo, and using my stock radiator position.

[Horsepwraddict]

That would fit an s10 also, just about the same dimensions as most S10 swap radiators. Good deal and good luck with the sale.

[loweredd]

Thanks. Yeah, it would be awesome in an S10.

[bczee]

I don't need one. But what are the Dim's.. someone else might be able to use one if yours is the same height and width...

but, yeah.. killer deal if someone is in the market and it will work out..!

[loweredd]

16x31 and I think it's about 8 inches thick. tehehehehehe. I'm in CA right now, but will measure for sure when I get back home.

[loweredd]

Oops, forgot about this till someone asked.

It comes in at just under 7 inches thick for the whole assembly.

[Bad Chad]

16x31 will also fit in a fox Mustang... Mine sit low because of the cold side on my turbo's... I just got my radiator today, same size.