#21 Staging Lane
Join Date: May 2008
Posts: 87
my first plan was a medium size single turbo for my 7 but now i am leaning towards just a natural motor. keep up the good work it will be a screamer.
#22 TECH Resident
Join Date: Dec 2004
Location: Kuwait
Posts: 929
Looks like a killer build. Im interested in what you plan to do on the rear suspension.
__________________
#23 Staging Lane
Join Date: Feb 2007
Location: Cincy Ohio
Posts: 63
Almost have the wastegate done and the downpipe.
__________________
1993 fd rx-7 6 speed 2002 z06 motor with intake long tube headers 3 inch dual exhaust trex cam
And a little purple bottle.
The old: 450 hp srt 4 ran 11's
#24 TECH Resident
Join Date: Dec 2004
Location: Kuwait
Posts: 929
Looks like that filter will be a bitch to change.
__________________
#25 Launching!
Join Date: Apr 2009
Location: stroudsburg Pa
Posts: 257
wow nice shop and build. i would say you are diy guy? very nice.
#26 Staging Lane
Join Date: Feb 2007
Location: Cincy Ohio
Posts: 63
Quote:
Originally Posted by
73 nova guy wow nice shop and build. i would say you are diy guy? very nice.
Yup My goal is always to do everything myself. I have never paid for any work before. I'm actually a engineering student by trade and should graduate in 5 quarters.
__________________
1993 fd rx-7 6 speed 2002 z06 motor with intake long tube headers 3 inch dual exhaust trex cam
And a little purple bottle.
The old: 450 hp srt 4 ran 11's
#27 Staging Lane
Join Date: Apr 2008
Posts: 50
how thick are those primary tubes?
#28 TECH Addict
Join Date: Apr 2005
Location: Greenville,SC
Posts: 2,583
Awesome build man.
__________________
2002 WS6 M6 | 402 LS2 | AFR 225's | COMP 244/248 .612/.615 112LSA | Callies Compstar Crank & Rods | AMERICAN RACING 1 7/8 HEADERS & CATTED Y-PIPE | FAST 90 | NW 90TB | TEXTRALIA 0Z700 | RACETRONIX FUEL SYSTEM | 42# DELPHI INJECTORS |25% UD PULLEY | LM | LID | BAER ERADISPEEDS | PRO 5.0| KONI 4/3 | STRANO SPRINGS|BUILT & TUNED BY WILLIAMS PERFORMANCE 527 hp and 495 tq SAE www.fquick.com/RaptorWS6
#29 TECH Senior Member
Join Date: Apr 2005
Location: Pendleton
Posts: 8,139
not bad, i cant wait for the vid's to start rollin in
#30 Staging Lane
Join Date: Feb 2007
Location: Cincy Ohio
Posts: 63
Primaries are schedule 10 stainless
Should get this wastegate done tomorrow after work
__________________
1993 fd rx-7 6 speed 2002 z06 motor with intake long tube headers 3 inch dual exhaust trex cam
And a little purple bottle.
The old: 450 hp srt 4 ran 11's
#31 Teching In
Join Date: Dec 2008
Posts: 22
Wow!! Very impressive fab skills. Someday I hope to have welding skills to even match yours. COOL CAR!
#32 TECH Resident
Join Date: Dec 2004
Location: Kuwait
Posts: 929
Dumping it to atmosphere?
__________________
#33 Registered User
Join Date: May 2009
Location: Detroit
Posts: 34
Beautiful work man. Just wondering, are you going to be supporting the turbo at all other than hanging off the mani's? I only say that cause thats a lot of weight bouncing around up there and I'd hate to see it cause cracks.
#34 Staging Lane
Join Date: Feb 2007
Location: Cincy Ohio
Posts: 63
On to the radiator next then the intercooler
__________________
1993 fd rx-7 6 speed 2002 z06 motor with intake long tube headers 3 inch dual exhaust trex cam
And a little purple bottle.
The old: 450 hp srt 4 ran 11's
#35 Launching!
Join Date: Apr 2009
Location: stroudsburg Pa
Posts: 257
Quote:
Originally Posted by
V8RX7FTW
On to the radiator next then the intercooler
i like the merge into the waste gate very nice!
#36 Teching In
Join Date: Apr 2008
Posts: 41
truly killer work
#37 TECH Apprentice
Join Date: Jul 2004
Posts: 371
wow man thats wild stuff, amazing work so far!
__________________
my cardomain '87 FC RX7 widebody 2750 lbs w/ LS1T56 swap
<---SOLD project pics
Not sure when or what the next project will be... LS1 RX8? LS1 240sx? LS1 3series? LS1 Miata? LS1 S2000?
#38 Staging Lane
Join Date: Feb 2007
Location: Cincy Ohio
Posts: 63
Should have this mounted tomorrow. Got the end caps welded in place to the right and the left of the radiator. A piece of DOM tube will be welded from plate to plate.
__________________
1993 fd rx-7 6 speed 2002 z06 motor with intake long tube headers 3 inch dual exhaust trex cam
And a little purple bottle.
The old: 450 hp srt 4 ran 11's
#39 Restricted User
Join Date: Jun 2009
Location: Maryland
Posts: 0
looks awesome so far !
#40 On The Tree
Join Date: Aug 2008
Location: Winnipeg, Manitoba
Posts: 136
Great work! I've been following the build on the RX7 boards
__________________
LM7/T56 FC-TII <-- Under Construction!
LS6 Intake, 60# motrons, two hair dryers and a few other odds and ends!
Tags 93 , axle , chromoly , conversion , fd , fd3s , forsale , ls1 , ls2 , ls6 , projects , rx7 , sale , straight , swaps , t6 , turbo
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
