StreetSweeper CamOnly 10.6 @ 128

studderin · 10-19-2009, 01:04 AM

I took the passenger seat out, carpet, conscel and catback/Ypipe. It didn't drop that much weight I have good light stuff anyway, my carpet is light #12 passenger seat is like 22#. Catback and Ypipe not sure. Had more gas then I would have liked just under 1/2. I was hoping to be lighter but it was just under 3K without me @ 2980 for a 3160 race weight. Da was good but nothing crazy

12:54
Density Altitude: -256 feet
Relative Density: 100.75 %

2:54
Density Altitude: -80 feet
Relative Density: 100.23 %

3:54
Density Altitude: -163 feet
Relative Density: 100.48 %

1st pass I think I missed a gear, but then got in the zone and ripped these off.

raised the shiftlight gained nothing MPH, stock heads, and fast intake limit rpms. peak power is around 6200 I belive with this cam. But raised the 2step a bit

and ripped off better 60's but missed 3rd the last 3-4 passes in a row

1.43 and is movin should be a 10.65 maybe?

I think I'm #9 or #10 now on the LS1/LS6 cam only list

studderin · 10-19-2009, 01:05 AM

Here is a vid form today I'm near the end. thanks to JT67 t taking it.

http://www.youtube.com/watch?v=YxDRRDTn5Ao

socalLS1 · 10-19-2009, 03:09 AM

where can i get one of these cams from.

Beaflag VonRathburg · 10-19-2009, 03:56 AM

Your pass in the video is around 2:44 for those of you that would like to skip through the rest.

Great results and it shows that the weight really makes the difference.

s346k · 10-19-2009, 06:34 AM

i was wondering how you could cut a 1.4x 60', trap 128, and not be going 10.40s?

NHRAFORMULA00 · 10-19-2009, 07:00 AM

nice times,thats a real good 60 ft,would of been a low 10.6x for sure.

studderin · 10-19-2009, 07:35 AM

Quote:

Originally Posted by socalLS1

where can i get one of these cams from.

I got mine local at NewEra LINK, it s FTI/Ed Curtis grind. That miami1234 (christian with the red c5) put down 511whp with it fast90/90 and ET 215s. Its a bad ass cam

Quote:

Originally Posted by Beaflag VonRathburg

Your pass in the video is around 2:44 for those of you that would like to skip through the rest.

Great results and it shows that the weight really makes the difference.

whats funny is I didnt take that much weight out as I was hoping. The cars 3360 on the stock wheels and 28" DR with me. thats gone 11.20s The Drag wheels save a bunch, 3280 maybe 3260 thats gone 10.84. This "weight removal" for the 2nds to last track day to get the car like some other guy was only 100#s less with no exhust system (3160) Not sure what Im going next year, I know I can go under 10.50s cam only. I havn't taken the door panels off and done anything there, 20-25 maybe? The S60 is 50# then a fab9, steel DS is heavy. The car need more gear for this setup to be max effort, carys single plane and a 4150 TB and SD tune should keep making power over 7K. Im not sure how this other guys were going faster shifing at 7500-7800 with stock heads, and a fast intake? rodney/jugger/LS1joe/magnus...?

studderin · 10-19-2009, 07:39 AM

Quote:

Originally Posted by s346k

i was wondering how you could cut a 1.4x 60', trap 128, and not be going 10.40s?

No idea, should it be? I dont drive that bad or anything?

JasonShort · 10-19-2009, 09:14 AM

Johnny, great job again! Good driving buddy

ndfrsd6 · 10-19-2009, 11:48 AM

awesome job man !!! thats getting it done for sure

PREDATOR-Z · 10-19-2009, 11:50 AM

Very nice for a MS3 size cam (or is it vice versa

).
Good air, good car, good weight, good driving = lots of fun.

chrs1313 · 10-19-2009, 06:55 PM

nice times and run...that is representing for the m6 crowd

i also like the hood and smooth bellows those look familiar...

studderin · 10-19-2009, 07:13 PM

Quote:

Originally Posted by PREDATOR-Z

Very nice for a MS3 size cam (or is it vice versa

).

haha had to bring that up

Mean87SS · 10-19-2009, 07:23 PM

good stuff!

98blueSScamaro · 10-19-2009, 07:30 PM

Very nice times Looks like we are living at the track one day out of the weekend haha I am gunning for them times this sunday so look out haha And bad ass 60's and times. Looks like you almost got the launch down.

Rob

studderin · 10-19-2009, 07:35 PM

Good luck, your need it

Paint_It_Black · 10-19-2009, 08:57 PM

What is the size of that intake lobe on your streetsweeper?

DTB_LS1 · 10-19-2009, 09:35 PM

Great times!!! What kinda power are you putting down? I'm curious because I'm wondering how similar our setups are. Hopefully with a little more seat time I can get my E.T.s down where your at.

98blueSScamaro · 10-19-2009, 10:58 PM

Quote:

Originally Posted by studderin

Good luck, your need it

I have been pulling weight out of my car for the past week. Car was 3475 with me in it. I am sure I got about close to 200lbs out of the car maybe more so well see. I think I can do alot better oh and I am working on getting one of them small batterys.

Rob

chrs1313 · 10-19-2009, 11:03 PM

Quote:

Originally Posted by Paint_It_Black

What is the size of that intake lobe on your streetsweeper?

somewhere around 236 right?