so i have the hp but a 10 bolt with a ring gear spacer ! 4600 stall how many runs do u all think ill make it at the track takeing it easy out of the hole ? i've already decided im going for broke '' if i make it that far ''the last run tranbrake stalled all up. cars untuned running a little fat 3250 pounds
With my six speed car I did fine rolling out before going all out, but the first time I tried to launch it I broke an axel. Bought moser axels went back tried it again and exploded the carrier. That was on 17" mt's with 550 rwhp.
I have beat the hell out of mine for the past 2 years every weekend at the track and just pulled it out in perfect working order to make room for a new 9"...
1.47 60's all day and night here.
__________________ -Justin Quillen- 1999 Z/28 A3 Onyx Black - 6.94 @ 97.88 with a 1.47 60' N/A 1998 Z/28 A4 Bright Red - 12.6 @ 108 mph Spinning, We will never know what it really had... (R.I.P.)
yeah more info...no wheel hop and stock gears will do 1.4 60' without breaking
__________________ LATE MODEL PERFORMANCE
94 Artic White A4 Z...The Toy | 95 Polo Green 6 Speed/99 NBM S10...The Daily's | 1994 Polo Green Z, cam only toy
Sold...1998 Black Z, 1999 NBM Z, 1999 Red Z, 2000 NMB Z, 1994 Black Z, 1996 Polo Green Formula, 1996 Artic White Formy, 1999 White S10
Mine has been good for 10.08 @ 134 with a 1.47 60'.... Putting on a BMR Torque arm and Drag bar today and will be going for 9's next weekend. As long as there is no wheel hop and you haven't already done something dumb to hurt it the 10 bolt will live.
well i made 9 passes saturday with no problems took it easy for the most part 1.65 60ft . Im not worried about it anymore should have a 9in in it before the next time out .
Hell ive ran my freak stock rear end for 9 years now and still good as new. I run mine on the street more than the track but its dead hooked on slicks and drag radials with no whining from it.
__________________
2000 Camaro SS - 370 nitrous motor, 11:5:1 compression, 100mm mafs, 102mm tb, port and polish l92 heads, port and polish vic jr intake, 1 7/8" headers, dynomax bullets dumped off headers, dual stage, 400 shot, th400 rmvb, transbrake, 4200 stall, 3350lbs, stock rearend
2004 Denali (tow rig) - 3 and 5 drop, black 22" KMC's, black headlight and bumper lights, upper and lower billet grille, jba headers, magniflow exhaust, port and polish tb and mafs, cai, superchips, hidden 150 shot
all you guys beating the hell out of it must have autos cause my 6 speed with just a catback, lid, dr's destroyed mine. launching at 5k dead hook in a 6spd = broke axle inside the posi unit . at least my 9" hasnt even flinched at that kind of abuse
__________________
99 z28 m6: slp lid, fast 92/92 nw tb, tsp 1 7/8s" headers, tsp ory, magnalfow cb, 3" electric cutout, currie 9+ detroit locker 4.11s (tuned by ryne@cms with current mods cutout closed: 359.5hp 364.1tq)
550ish hp 10 bolt 
. Run the shit out of it anyway.
. at least my 9" hasnt even flinched at that kind of abuse
