01' SS Custom Cam & 243s = 474 rwhp / 428 rwtq *NOW w/ TRACK RESULTS*
#1
01' SS Custom Cam & 243s = 474 rwhp / 428 rwtq *NOW w/ TRACK RESULTS*
2001 Camaro SS
Rebuilt 346ci LS1 with 300 miles
T56 Trans - Monster Stg 3 and 26lb flywheel
Stock driveshaft
10 bolt rear w/ 3.42 gears
Heavy chrome 17" Zr1's with Nitto 555r's
RPM tune in Garner, NC
Custom Cam from Advanced Induction
243 heads CNC'ed by Advanced Induction
Lightly ported FAST 92 intake
Nick Williams 92mm tb
FTP 98mm air lid
GM 85mm screened maf
Chrs1313 ram air
K&N air filter
A big thanks goes out to Ryan and his crew at RPM for a job well done and a for sure returning customer once again!
Overall I'm very happy with the car. Before the heads went on the car made 419/392 with a slightly smaller cam with the more aggressive XER lobes than what it has now. The car pulls wayyy harder now and is much more responsive to the throttle. Still getting 22mpg on the freeway also!
I have about 150 pictures and a handful of videos of the build thread I will be posting shortly. I will put a link in here to the build thread. Just need to find a computer and internet to use instead of my phone.
Any questions feel free to ask.
Rebuilt 346ci LS1 with 300 miles
T56 Trans - Monster Stg 3 and 26lb flywheel
Stock driveshaft
10 bolt rear w/ 3.42 gears
Heavy chrome 17" Zr1's with Nitto 555r's
RPM tune in Garner, NC
Custom Cam from Advanced Induction
243 heads CNC'ed by Advanced Induction
Lightly ported FAST 92 intake
Nick Williams 92mm tb
FTP 98mm air lid
GM 85mm screened maf
Chrs1313 ram air
K&N air filter
A big thanks goes out to Ryan and his crew at RPM for a job well done and a for sure returning customer once again!
Overall I'm very happy with the car. Before the heads went on the car made 419/392 with a slightly smaller cam with the more aggressive XER lobes than what it has now. The car pulls wayyy harder now and is much more responsive to the throttle. Still getting 22mpg on the freeway also!
I have about 150 pictures and a handful of videos of the build thread I will be posting shortly. I will put a link in here to the build thread. Just need to find a computer and internet to use instead of my phone.
Any questions feel free to ask.
Last edited by djfury05; 02-12-2011 at 03:33 PM.
#5
Lol I have debated painting that thing for a long time now but I'm just going to leave it be for now.
Trending Topics
#13
I plan to get it to the track if they are open for sure. I only have a couple weekends left before I deploy so it needs to hurry up and be nice weather around here.
The guys at AI are really nice guys. They really know what they are doing there. These numbers were attained on the stock sized valves even!
The guys at AI are really nice guys. They really know what they are doing there. These numbers were attained on the stock sized valves even!
#16
Here is a short idle vid of the first start up. Sorry it is so short I had to use my phone and there is a limit on it.
http://s268.photobucket.com/albums/j...0202150611.mp4
This is a video of when the car blew up on the dyno. You can't hear anything happen in the video but #8 intake valve broke off and blew a hole through piston #8.
http://www.youtube.com/watch?v=1SdmCCdSS1w
http://s268.photobucket.com/albums/j...0202150611.mp4
This is a video of when the car blew up on the dyno. You can't hear anything happen in the video but #8 intake valve broke off and blew a hole through piston #8.
http://www.youtube.com/watch?v=1SdmCCdSS1w
#18
On The Tree
Join Date: Aug 2009
Location: Wilmywood NC
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
A. Since you didn't hear it blow up on the dyno, when did you know the engine was hurt?
B. That video of the exhaust is such a tease, as soon as it started it ended
C. Yep Vos, it's Heater
B. That video of the exhaust is such a tease, as soon as it started it ended
C. Yep Vos, it's Heater