LS1TECH - Texas Classifieds http://www.ls1tech.com/forums Sell your items and vehicles here in Texas en Sat, 21 Nov 2009 07:10:42 GMT vBulletin 60 http://images.ibsrv.net/ibsrv/res/src:www.ls1tech.com/get/forums//images/misc/rss.jpg LS1TECH - Texas Classifieds http://www.ls1tech.com/forums FS: LT1 T56/DF prssure plate and Fidanza flywheel http://www.ls1tech.com/forums/texas-classifieds/1207421-fs-lt1-t56-df-prssure-plate-fidanza-flywheel.html Sat, 21 Nov 2009 03:58:59 GMT I have the T56 from my 95 Z28 FS, 140K miles but shifter perfect, no noise, with bellhousing and stock shifter base and i should have a short stick. Asking 950$ Centerforce Dual Friction LT1 clutch with about 12k miles on it. Asking 300$ Brand new Fidanza aluminum flywheel for the LT1... I have the T56 from my 95 Z28 FS, 140K miles but shifter perfect, no noise, with bellhousing and stock shifter base and i should have a short stick.

Asking 950$

Centerforce Dual Friction LT1 clutch with about 12k miles on it.

Asking 300$

Brand new Fidanza aluminum flywheel for the LT1 trans for a pre 86 SBC or pre 90 BBC with the two piece rear main seal.

Asking 300$

Spohn T56 cross member for third gen F body, with the TQ arm mount.

100$

Or, take it all for 1400$

PM me here or zones89rs@yahoo.com

Z ]]> Texas Classifieds ZONES89RS http://www.ls1tech.com/forums/texas-classifieds/1207421-fs-lt1-t56-df-prssure-plate-fidanza-flywheel.html <![CDATA[FS:C5 Rear end, couple painted interior pieces, rear bumper & quarters, etc..]]> http://www.ls1tech.com/forums/texas-classifieds/1207390-fs-c5-rear-end-couple-painted-interior-pieces-rear-bumper-quarters-etc.html Sat, 21 Nov 2009 01:57:50 GMT Hey guys, I have a few things left over from my 01 C5 and a few new things. 2001 C5 Rear Differential, 3:15 Gear ratio, ~80k miles $250 1997-2004 Brand New OEM Rear Bumper--Never touched $250 Hey guys,

I have a few things left over from my 01 C5 and a few new things.


2001 C5 Rear Differential, 3:15 Gear ratio, ~80k miles
$250

1997-2004 Brand New OEM Rear Bumper--Never touched
$250

1997-2004 Rear Quarter Panels for a COUPE, one brand new and one used (silver)
$150 for the pair or
$350 for the quarters and rear bumper

C5 Gaugle Cluster Bezel and Outer Bezel, Smoothed and Painted Torch Red Flawlesss
$150

C5 Pillar Posts, smoothed and painted Torch Red, good condition
$50

I should have some pictures up Monday.

713-376-9090 or PM.

Thanks
Tyler ]]> Texas Classifieds Tyler @ Pavlock http://www.ls1tech.com/forums/texas-classifieds/1207390-fs-c5-rear-end-couple-painted-interior-pieces-rear-bumper-quarters-etc.html NX Kit with Accessories!!! http://www.ls1tech.com/forums/texas-classifieds/1207364-nx-kit-accessories.html Sat, 21 Nov 2009 00:23:35 GMT Selling a Nitrous Express Kit with all the bells and whistles. Bought used and never got around to installing it all. Bottle is maybe 3/4 full, I filled it and purged alot while installing :drive: 12lb Carbon Fiber Bottle Single Nozzle Nitrous Kit Purge Bottle Heater Bottle Opener Wot... Selling a Nitrous Express Kit with all the bells and whistles. Bought used and never got around to installing it all. Bottle is maybe 3/4 full, I filled it and purged alot while installing :drive:

12lb Carbon Fiber Bottle
Single Nozzle Nitrous Kit
Purge
Bottle Heater
Bottle Opener
Wot Switch
Fuel Pressure Safety Switch
In-Line Filter (new)
Blow Down Tube
Mallory Window Switch
(8) Brand New NGK TR-6 Plugs
Excess Wiring and Switchs
Autometer Air/Fuel Ratio Guage
Bottle Guage (needs liquid and plug, you can see it in the picture)

I will sell the entire kit for $800 or $600 without the bottle opener and bottle. If you have any questions, Please email me at nbmta00@yahoo.com. I am located in Dallas,TX.
Attached Thumbnails
Click image for larger version Name: 002.jpg Views: N/A Size: 250.7 KB ID: 206703   Click image for larger version Name: 004.jpg Views: N/A Size: 214.3 KB ID: 206704   Click image for larger version Name: 017.jpg Views: N/A Size: 220.5 KB ID: 206705   Click image for larger version Name: 018.jpg Views: N/A Size: 212.9 KB ID: 206706   Click image for larger version Name: 019.jpg Views: N/A Size: 189.7 KB ID: 206707  

Click image for larger version Name: 022.jpg Views: N/A Size: 191.0 KB ID: 206708   Click image for larger version Name: 023.jpg Views: N/A Size: 219.5 KB ID: 206709   Click image for larger version Name: 025.jpg Views: N/A Size: 193.4 KB ID: 206710  
]]> Texas Classifieds y2kta http://www.ls1tech.com/forums/texas-classifieds/1207364-nx-kit-accessories.html FS 2003 QS Z06 82k miles Fort worth $16,500 http://www.ls1tech.com/forums/texas-classifieds/1207356-fs-2003-qs-z06-82k-miles-fort-worth-16-500-a.html Sat, 21 Nov 2009 00:12:11 GMT F/S 2003 z06 82k miles $16,500



Here is the story...

The car has been a project and just has never made it's way to being a full project. It has been sitting in my mom's shop for a lil over a year now and has been through 2 motor transplants. It now has a stock cube 346 that has been rebuilt by Mike at LG Motorsports. It has a G5X3 cam in it with ARP head bolts. I bought the motor from him back in May and installed it in late june, early july. When I got everything put back together I started the car up and it had a rear main oil leak. Mike told me that I could bring him the car and he would fix it, but I haven't had the time or money to invest in the car anymore. If I remember correctly the car has about 82,xxx miles. Also has mod red interior, minus the mod red seats. They have been replaced with black z06 seats.

The car will also need to be tuned!!! Still has 408 tune on computer. I have a MS3 cam w/ 5.3 heads tune that the car can run on once the leak has been fixed.

Here are a list of parts that are currently on the car:

Performance:
-Fresh 346ci Ls6
-G5X3 LG cam
-Halltech Elbow
-LS2 90mm TB
-FAST 90mm intake manifold
-LG Longtube Headers
-SLP Loudmouth Cat back
-Spec Steel Flywheel
-Spec Stage 3+ disc
-NGK Plug wires

Interior:
-Red leather partition
-z06 shift ball (lol :rofl: )

Exterior:
-18" front z06 replicas 18x9.5 - Nitto 555r 275/35/18
-18" rear z06 replicas 18x12 - Nitto Drag Radials 335/30/18
-Spoiler (Don't know what brand, check pictures)
-A** end of car is painted black, was going for the c5r look :thumbs:

I know I'm forgetting some things... If you have any questions please ask!!!

I'm asking 16,500 firm. Only thing that this car needs is the rear main fixed. I don't have time to fix it and I'm looking to sell quick. Have VIN number for anyone who wants it.

Thanks,

Kyle Wooldridge


Rear tire


Exhaust and Headers


Tires


Spec Clutch and Flywheel Stage 3+


Intake, TB, Fuel Rail on old 408 setup


Old Wheels


Rear Shot

Will have more pictures this weekend of how the car sits now. These should give you a basic idea. Thanks for looking!!! :flag: ]]> Texas Classifieds camnz06 http://www.ls1tech.com/forums/texas-classifieds/1207356-fs-2003-qs-z06-82k-miles-fort-worth-16-500-a.html Dec 4-5 TX Winter Nationals at HRP http://www.ls1tech.com/forums/texas-classifieds/1207353-dec-4-5-tx-winter-nationals-hrp.html Sat, 21 Nov 2009 00:09:36 GMT I have 6 tickets for the December 4-5 event at HRP. Cost $30 a piece, but how does $15 sound? Ill work ya deal if you want them all :)


http://www.houstonraceway.com/index....h=12&year=2009 ]]> Texas Classifieds WS6NIGHTMARE http://www.ls1tech.com/forums/texas-classifieds/1207353-dec-4-5-tx-winter-nationals-hrp.html WTB. Eibach pro kit.... http://www.ls1tech.com/forums/texas-classifieds/1207283-wtb-eibach-pro-kit.html Fri, 20 Nov 2009 20:14:18 GMT I would like to buy a pro kit somewhere in or near the houston area. i have a 99 camaro z28 with cut springs and i need a pro kit pronto!!! give me a call @281-216-8529. Thanks my name is Randy I would like to buy a pro kit somewhere in or near the houston area. i have a 99 camaro z28 with cut springs and i need a pro kit pronto!!! give me a call @281-216-8529. Thanks my name is Randy ]]> Texas Classifieds justapony http://www.ls1tech.com/forums/texas-classifieds/1207283-wtb-eibach-pro-kit.html <![CDATA[WTB zr1's]]> http://www.ls1tech.com/forums/texas-classifieds/1207282-wtb-zr1s.html Fri, 20 Nov 2009 20:11:19 GMT ok guys im looking for two black zr1's 17x9 with a chrome lip let me know if anybody has some for sale. Thanks, tony ]]> Texas Classifieds slvrlt1er http://www.ls1tech.com/forums/texas-classifieds/1207282-wtb-zr1s.html Part out or sell complete...1997 WS6 http://www.ls1tech.com/forums/texas-classifieds/1207265-part-out-sell-complete-1997-ws6.html Fri, 20 Nov 2009 19:33:19 GMT Motor is blown and I don't have the time or money to fix it. I just got it all put back together and my neighbor backed into the front bumper...so it has a little damage in the front...but all repairable. Has 6-speed...if I can make more from it by parting it out I will go that route. If you need something from it shoot me an offer or just shoot me an offer on the whole car.
Attached Thumbnails
Click image for larger version Name: 97ws6.JPG Views: N/A Size: 25.5 KB ID: 206660   Click image for larger version Name: 1234.JPG Views: N/A Size: 62.3 KB ID: 206661  
]]> Texas Classifieds SunCoastTA http://www.ls1tech.com/forums/texas-classifieds/1207265-part-out-sell-complete-1997-ws6.html 1969 camaro 396 ss big block car $3500 nearly complete http://www.ls1tech.com/forums/texas-classifieds/1207264-1969-camaro-396-ss-big-block-car-3500-nearly-complete.html Fri, 20 Nov 2009 19:30:07 GMT This is a 1969 camaro, which needs to be put back together, i took it apart to restore and ran out of time to finish. It will make a great car and includes just about everything but the transmission. Includes nearly complete black interior and new black carpet. Has all sheet metal and extra brand... This is a 1969 camaro, which needs to be put back together, i took it apart to restore and ran out of time to finish. It will make a great car and includes just about everything but the transmission. Includes nearly complete black interior and new black carpet. Has all sheet metal and extra brand new sheet metal if you want to replace a few pieces with rust on them, drivers side floors and rear quarter pannel.
It does include the 69 396 engine but needs to be reassembled, it was torn down to be rebuilt. The 10 bolt rear end is freshly rebuilt with alburn aftermarket insides. Basicly the car just needs someone to put some time in it and paint it. Will make a great car and will be very valueable if done correct. The car also has tons of extra parts! 2 front frames, brake parts, suspension stuff. I do have the cowl hood and spoiler with car, also includes other ss parts, could make a ss 396 clone or go back with the a small block if you prefer to be correct.

The car does has the vin still intact and does have the clear title with the car! Lots questions over car, as far as i know the engine came from another 69 396ss car, i do not know for sure what engine came in this car from factory. Please resend emails, i have lost order of them since there was over 30 people that replied to this ad. Will take $3500 obo if i can get the car sold this weekend.

Possible trades with cash included,
iron block 6.0 shortblock/bareblock, fbody torque arm, 496 bbc pistons, f250 35" tires, 4-6in lift kit 00-04, etc.
Attached Thumbnails
Click image for larger version Name: 69 camaro.jpg Views: N/A Size: 7.2 KB ID: 206658   Click image for larger version Name: 69 camaro inside.jpg Views: N/A Size: 9.2 KB ID: 206659  
]]> Texas Classifieds lilred1995vette http://www.ls1tech.com/forums/texas-classifieds/1207264-1969-camaro-396-ss-big-block-car-3500-nearly-complete.html <![CDATA[GI: OEM c5z06's front 17x9.5/ rear 18x10.5 with good tires]]> http://www.ls1tech.com/forums/texas-classifieds/1207228-gi-oem-c5z06s-front-17x9-5-rear-18x10-5-good-tires.html Fri, 20 Nov 2009 18:02:16 GMT Im thinking about upgrading wheels if i can sell these for the price im looking for. Will take trades on TT2's or TTM's with some money on my side as well

click on the Pics link in my sig for pictures, near the bottom of the pics has some good ones of the wheels.These are the OEM c5z06's that came straight off a vette. There is no curb rash or any scrapes on the wheels. The tires are Goodyear GS-DS all the way around, the fronts are 275/40/17 and the rears are 295/35/18. The rears have about 70% life and the front have about 70% life, except the front have a little weird tread wear because the previous owner had a bad alignment. I still bought the wheels because they don't look bad, and easily have ~20K miles left in them.

looking for $700obo, will take offers. no lowballing. I do not need to sell these wheels. ]]> Texas Classifieds twitchtwice http://www.ls1tech.com/forums/texas-classifieds/1207228-gi-oem-c5z06s-front-17x9-5-rear-18x10-5-good-tires.html Comp cam for sale http://www.ls1tech.com/forums/texas-classifieds/1207226-comp-cam-sale.html Fri, 20 Nov 2009 17:58:47 GMT i got a comp custom grind cam for sale had it in my car for 9k miles specs are 591/595 232/236 on 112 ls in great condition just going differant route 125.00 i got a comp custom grind cam for sale had it in my car for 9k miles
specs are 591/595 232/236 on 112 ls in great condition just going differant route 125.00 ]]> Texas Classifieds bloo4.6 http://www.ls1tech.com/forums/texas-classifieds/1207226-comp-cam-sale.html qtp elec cut outs http://www.ls1tech.com/forums/texas-classifieds/1207215-qtp-elec-cut-outs.html Fri, 20 Nov 2009 17:16:52 GMT i have 2 3inch qtp elec cutouts i got them from a friend of mine and they was in perfect working order...asking250 for both 281-726-1053 i have 2 3inch qtp elec cutouts i got them from a friend of mine and they was in perfect working order...asking250 for both 281-726-1053 ]]> Texas Classifieds 08-4door http://www.ls1tech.com/forums/texas-classifieds/1207215-qtp-elec-cut-outs.html FS: ls1 BMR k member http://www.ls1tech.com/forums/texas-classifieds/1207181-fs-ls1-bmr-k-member.html Fri, 20 Nov 2009 15:33:40 GMT just bought this from tinkrd on this board but going different route. Will fit stock rack n pinion. Is black in color. $375 obo. just bought this from tinkrd on this board but going different route. Will fit stock rack n pinion. Is black in color. $375 obo. ]]> Texas Classifieds Tin.Can.Z http://www.ls1tech.com/forums/texas-classifieds/1207181-fs-ls1-bmr-k-member.html 01 zx6r $2500 http://www.ls1tech.com/forums/texas-classifieds/1207170-01-zx6r-2500-a.html Fri, 20 Nov 2009 14:52:51 GMT I have a 01 ZX6R with 20500 miles... It was running great but it sat for a 2 months and now will not idle. It will also need a battery. The bike is lowered and streched. This is a good deal, I would think all it needs is the carbs cleaned, it will only run with the choke on. Let me know I need... I have a 01 ZX6R with 20500 miles... It was running great but it sat for a 2 months and now will not idle. It will also need a battery. The bike is lowered and streched. This is a good deal, I would think all it needs is the carbs cleaned, it will only run with the choke on. Let me know I need it gone ASAP!

Thanks
Chris
Attached Thumbnails
Click image for larger version Name: zx6r.jpg Views: N/A Size: 9.2 KB ID: 206639  
]]> Texas Classifieds bigv99SS http://www.ls1tech.com/forums/texas-classifieds/1207170-01-zx6r-2500-a.html WTT complete exhaust setups. http://www.ls1tech.com/forums/texas-classifieds/1207166-wtt-complete-exhaust-setups.html Fri, 20 Nov 2009 14:14:16 GMT I have a Mac mid length headers A hooker y pipe going into a flow master muffler and brand new 200.00 exhaust tips. All the emission hook up are there. The only thing missing is the cats. The set up sounds really good, and I spent over 1200 on this set up in april of this year. I am wanting to... I have a Mac mid length headers
A hooker y pipe going into a flow master muffler and brand new 200.00 exhaust tips. All the emission hook up are there. The only thing missing is the cats. The set up sounds really good, and I spent over 1200 on this set up in april of this year.

I am wanting to trade for a long tube and true dual set up. I am located on the Fort worth side of DFW, and I want to stay in the DFW area. LMK if anyone wants to trade. System has 600 miles on it. PM me please. ]]> Texas Classifieds 98Z2885 http://www.ls1tech.com/forums/texas-classifieds/1207166-wtt-complete-exhaust-setups.html