LS1TECH - Corvette Performance http://www.ls1tech.com/forums C5 | Z06 | C6 en Sat, 21 Nov 2009 02:00:31 GMT vBulletin 60 http://images.ibsrv.net/ibsrv/res/src:www.ls1tech.com/get/forums//images/misc/rss.jpg LS1TECH - Corvette Performance http://www.ls1tech.com/forums My C6 build LS2/AFR/402/NITROUS http://www.ls1tech.com/forums/corvette-performance/1207274-my-c6-build-ls2-afr-402-nitrous.html Fri, 20 Nov 2009 19:58:19 GMT I decided about a month and a half ago to have a stroker motor built after my timing chain broke.

The motor is a LS2 402ci. The parts im using are callies 4340 4.0" crankshaft with indexed & trued journals. Callies H beam 6.125" rods with ARP 2000 7/16 bolts. Wiseco 4.005" nitrous pistons w/anti-friction coating and tool steel wrist pins. NPR stainless .047 3mm rings for reduced friction & high heat applications. Clevite MS2199H main bearings Clevtite CB663 H rod bearings, ARP main studs. Valve job to port work. 1.600 manely one piece intake valves. Viton valve seals. ARP head studs. AFR heads 225cc.

Standalone fuel set-up, Ram twin disk with upgraded iron disc. Ligenfelter timing tuner. Nitrous NANO.

Car already has LG longtubes (catless) x-pipe- borla exhaust, ligenfelter gt7 camshaft. TNT nitrous wet kit, Fast 90 intake manifold, underdrive pulley, ligenfelter CAI. B&M short shifter, tr6 plugs....and a few other mods im forgetting..........

here is the original car



here is my car with no motor OMGZ!!!



Here is my new motor








First start up
http://www.youtube.com/watch?v=nA0guqzYY4o

We had a delay getting my standalone, so we dynoed motor only until it came in. Car made 530rwhp 500lbtq

http://www.youtube.com/watch?v=bhBSD_0MXdk

my Standalone finally came in and is being installed as well as my nitrous nano.

here are some pics

(best bday present my GF ever got me...except for some ass)

and the motor





should have a number on nitrous by monday or tuesday :cheers: I hope it makes over 700rwhp, gonna use a 200 shot :corn: ]]> Corvette Performance choopak http://www.ls1tech.com/forums/corvette-performance/1207274-my-c6-build-ls2-afr-402-nitrous.html <![CDATA[Ragin' Racin'-Stage 5 "Fastest Stock Shortblock C6 Z06"]]> http://www.ls1tech.com/forums/corvette-performance/1207193-ragin-racin-stage-5-fastest-stock-shortblock-c6-z06.html Fri, 20 Nov 2009 15:57:44 GMT Hey guys here is one of our Stage 5 Z06's
Mods include -
Vortech Supercharger 8lbs
RR-Blower Cam
RR- Ported Intake & TB
Kooks 1 3/4 Stepped 2'' headers
RPM Auto Trans 3200 stall
Snow Meth Injection
RR-Tuning
706rwhp

This is the Fastest Stock Short Block Z06 built by Ragin Racin. It also has the best 60' ft recorded by a C6 Z06 with a 1.29. It is also not a one hit wonder. We have several 9.5 timeslips to back it up.


[youtube]hjrBmlXfZZk[/youtube] ]]> Corvette Performance Ragin Racin http://www.ls1tech.com/forums/corvette-performance/1207193-ragin-racin-stage-5-fastest-stock-shortblock-c6-z06.html NEW more affordable HRE 560 series wheel http://www.ls1tech.com/forums/corvette-performance/1207162-new-more-affordable-hre-560-series-wheel.html Fri, 20 Nov 2009 13:46:30 GMT HRE has intruduced a new series of wheel built with value and affordability in mind. The new 560 series comes in 560R straight lip and 560C stepped lip. Specific styles are 560, 563, 565, and 567 shown below. Available in 18-20" diameter.



Please email jason@katechengines.com or PM for pricing. Make sure to include your desired diameter. ]]> Corvette Performance Katech http://www.ls1tech.com/forums/corvette-performance/1207162-new-more-affordable-hre-560-series-wheel.html C6 Corvette Specials - www.PartsTaxi.com http://www.ls1tech.com/forums/corvette-performance/1206888-c6-corvette-specials-www-partstaxi-com.html Thu, 19 Nov 2009 18:42:02 GMT Hey guys! It's been a while since I've been on this forum and for that I'm sorry. I put together this list of specials for you Vette guys. Please keep in mind I am a GM dealer, I can get you ANY GM PART still in production. Please contact me directly for any assistance.


Genuine GM C6 Corvette PAL
17800593 - C6 Corvette Personal Audio Link - $149.58

19170234 - GM Genuine Accessory Splash Guards - $91.88

C6 Maintenance Parts
12626224 - Single UPF48R Filter - $8.38 each
To order a case of 12 UPF48R use Part Number 12packUPF48R for $95.76 total (thats $7.98 each!)
25329389 - UPF44 Oil Filter $8.22 each
89017524 - PF48 Oil Filter $4.98 each
19210283 - PF46 Oil Filter $4.78 each
15861929 - Passenger Compartment Filter - $42.62
10342024 - LS2 Air Filter Element (Need 2) - $16.42 each
15776148 - LS3 & LS7 Air Filter Element - $85.44 each
25940997 - LS9 Air Filter Element - $114.14 each
24241872 - Magnetic Drain Plug - $14.65

OEM GM Brake Pads - Standard C6 and Z51
19152862 - Front OEM Pad Kit - $161.46
89026853 - Rear OEM Pad Kit - $99.40

Ceramic Brake Pads for Stock and Z51 systems
88909667 - Front Ceramic Pad Kit - $88.37
88909668 - Rear Ceramic Pad Kit - $59.31

Base C6 ACDelco Drilled & Slotted Rotors
19183532 - Right Front - $94.19
19183533 - Left Front - $94.19
19183534 - Right Rear - $87.09
19183535 - Left Rear - $87.09
That's $362.56 for all 4!!!

2008 and newer Key & Fobs (transmitters)
25926479 - #1 Key Fob - $89.72
25926480 - #2 Key Fob - $89.72
25995382 - Key (does not come with Fob) - $38.14

Grand Sport Rear Wide Body Kit for Vert - $1243(these panels cost slightly higher then normal kit)

Grand Sport Front Wide Body Kit - $2289.72

Chrome Z06 Emblems - 25919017 - $21.56 each
427 Script Emblems - 17803320 - $115

Rear Wide Body Kit - This is the complete rear wide body kit. ZR1 & Z06 are the same. Kit includes rear quarters, all fasteners, seals brake ducts, scoops and wheel liners. $1148

Z06 Rear Splash Guards
15818636 - Right Rear Splash Guard - $44.33
15818637 - Left Rear Splash Guard - $43.24
11519444 - Retainers - $1.38 ea. x 10 needed

ZR1 Front Wide Body Kit - This is the complete front wide body conversion to install ZR1 panels on the front of your C6. Kit includes fenders, fascia, seals, all hardware, ornaments. COMPLETE KIT. $4790.58
Not included in ZR1 Kit, but available for extra cost;
ZR1 Front Splitter - 25938053 - $1349
ZR1 Hood - 15844745 - $3679.55
ZR1 Rocker Panels - 15845019 & 15845020 - $948.01 each
ZR1 Roof Halo - 15843296 - $1386.05
ZR1 Roof Panel - 15843295 - $2190.73

Z06 Front Wide Body Conversion - This is the front wide body kit with the Z06 panels. This includes everything for installation minus the inner plastic liner that is glued to the body/frame. $3845.82

20822934 - Upgraded Metal Sway Bar End Links - $22.78 each

ZR1 Front and Rear Sway Bar Kit - Kit Includes front and rear sway bars and insulators $199.84

Z51 Front and Rear Sway Bar Kit - Our most popular bar kit. Kit includes front and rear stabilizer bars for Z51 - $191.84

Z06 Front and Rear Sway Bar Kit - Kit includes Front and Rear Stabilizer Bars for C6 Z06 and insulators - $224.83

C6 Z06 Shocks
10313647 - Front Shock - $61.43 each
25819268 - Rear Shock - $60.42 each

Z06 Brake Upgrade Kit - Kit includes both front calipers, both rear calipers, both front rotors, both rear rotors, front and rear GM OEM pads. We prefer not to substitute ACDelco as a replacement on this kit. - $1799.99

Z51 Brake Upgrade Kit - Kit includes both front rotors, both rear rotors and all four caliper mounting brackets - $489.78

15268606 - Tire Pressure sensor for 2010 and up - $39.99
25758220 - Tire Pressure Sensor for 05-09 - $55.08
15234846 - Tire Pressure Sensor Nut 05-10- $3.73

LS7 Clutch Kit - Kit includes LS7 Clutch and Flywheel - $431.97

89059282 - LS6 Slave Cylinder - $125.01
12564455 - LS6 Master Cylinder - $127.49
14061685 - Pilot Bearing - $11.99

19172324 - Genuine GM Accessory Performance Exhaust Cat-Back - $1219
19172326 - Genuine GM Accessory Off Road Cat-back exhaust - $1219

ZR1 Spoiler Kit - ZR1 Spoiler kit includes spoiler and 10 nuts needed for installation - $429.83

Full Width Design Spoiler
19172807 - Primer - $235.95
19172808 - Victory Red - $278.71
19172809 - Velocity Yellow - $278.71
19172810 - Machine Silver - $278.71
19172811 - Black - $278.71
19172812 - Jetstream Blue - $278.71
19172813 - Crystal Red - $278.71
19211166 - Cyber Gray - $278.71
19211165 - Switchblade Silver - $278.71
19211167 - Atomic Orange - $278.71

Stock Spoilers also available - Pricing as low as $144.86 - Please contact me for numbers/details

Genuine GM Console Lid with Jake Skull - 19209851 - $144.44

Genuine GM Accessory Console Lid with Logo
17802448 - Ebony With C6 - $99.30
17802449 - Cashmere With C6 - $99.30
17802450 - Cobalt Red With C6 - $99.30
17802451 - Titanium With C6 - $99.30
17802452 - Ebony With Z06 - $99.30

LS2 Color Keyed Fuel Rail Cover Set (left and right)
17800101 - Daytona Sunset Orange With Silver Lettering - $149.87
17800102 - Machine Silver With Red Letering - $149.87
17800103 - Victory Red With Silver Lettering - $149.87
17800104 - LeMans Blue With Red Lettering - $149.87
17800109 - Artic White With Red Lettering - $149.87
17800110 - Vlack With Red Lettering - $149.87
17800111 - Millennium Yellow With Red Lettering - $149.87
17800112 - Magnetic Red With Silver Lettering - $149.87
17802119 - Velocity Yellow With Red Lettering - $149.87
17802120 - Monterey Red With Silver Lettering - $149.87
19170525 - Atomic Orange With Silver Lettering - $149.87

Genuine GM Accessory Front End Bra
19202129 - With License Plate Opening - $89.73
19202139 - Without License Plate Opening - $89.73

Thanks!!!
Kevin
www.PartsTaxi.com
302-645-6221 x126
302-295-1240 - Fax
302-883-0227 - Parts Department Direct
kevin@lewesautomall.com ]]> Corvette Performance PartsTaxi.com http://www.ls1tech.com/forums/corvette-performance/1206888-c6-corvette-specials-www-partstaxi-com.html 98 turbo c5 http://www.ls1tech.com/forums/corvette-performance/1206850-98-turbo-c5.html Thu, 19 Nov 2009 16:45:46 GMT I have a bone stock c5 with a 76 mm turbo and 9 psi with 60 pound injectors will the stock fuel system feed this setup. IF not what do i need. I have a bone stock c5 with a 76 mm turbo and 9 psi with 60 pound injectors will the stock fuel system feed this setup. IF not what do i need. ]]> Corvette Performance tdt http://www.ls1tech.com/forums/corvette-performance/1206850-98-turbo-c5.html 1153 Code Question http://www.ls1tech.com/forums/corvette-performance/1206836-1153-code-question.html Thu, 19 Nov 2009 15:53:21 GMT I am getting this code and the car seems to run fine when the code pops up so I have just been deleting from the dash panel. It does not come back on while driving it only comes back on when I turn off car and restart again. Should I be concerned with this code since my car is modified with long... I am getting this code and the car seems to run fine when the code pops up so I have just been deleting from the dash panel. It does not come back on while driving it only comes back on when I turn off car and restart again. Should I be concerned with this code since my car is modified with long tube headers, cam, etc and it does have a good tune. I heard you can just delete or remove this code from it sending a signal to the PCM. This is what I have read that causes the problem(see below), does that mean that the code comes on because the sensor is not heating up fast enough and then I delete it and it does not come back on while driving because it did heat up? Any clarification would help!

The 1153 and 1154 engine code mean insufficient heat to the front oxygen sensors. LS1 sensors have a heater in them because they will NOT work unless they're hot. If they don't get hot enough, the car stays in open loop mode. Any increase in exhaust flow (bigger pipes, headers, mufflers) will greatly reduce your exhaust temperature, as a result the sensors don't stay hot enough to remain on (at least that's what happens to those of us who suffer from this issue). ]]> Corvette Performance 01WS6A4 http://www.ls1tech.com/forums/corvette-performance/1206836-1153-code-question.html lg g5x3 vs MS4 http://www.ls1tech.com/forums/corvette-performance/1206782-lg-g5x3-vs-ms4.html Thu, 19 Nov 2009 07:28:28 GMT helllo every body i want to know which f these cam will perform better both on 112lsa its will be on c6 2007 ls2 a6 and i have the torque converter helllo every body i want to know which f these cam will perform better both on 112lsa its will be on c6 2007 ls2 a6 and i have the torque converter ]]> Corvette Performance ls2 http://www.ls1tech.com/forums/corvette-performance/1206782-lg-g5x3-vs-ms4.html LS2/402/AFR 225/FAST 92/ProCharger F-1A at 12.5 psi = 864 rwhp on Mustang Dyno http://www.ls1tech.com/forums/corvette-performance/1206401-ls2-402-afr-225-fast-92-procharger-f-1a-12-5-psi-864-rwhp-mustang-dyno.html Wed, 18 Nov 2009 10:10:59 GMT http://www.exoticperformanceplus.com/projectCar.php?car=29 Link to car. Bob Image: http://i226.photobucket.com/albums/dd185/EPP_photo/V864rwhpdynograph.jpg http://www.exoticperformanceplus.com...Car.php?car=29
Link to car. Bob

]]> Corvette Performance Exotic Performance Plus http://www.ls1tech.com/forums/corvette-performance/1206401-ls2-402-afr-225-fast-92-procharger-f-1a-12-5-psi-864-rwhp-mustang-dyno.html emergency ls3 cam swap advice! http://www.ls1tech.com/forums/corvette-performance/1206273-emergency-ls3-cam-swap-advice.html Wed, 18 Nov 2009 02:19:16 GMT I just got the news that the lg mtrsports g6x3 cam requires flycutting....so I'm already 2k in the hole for nothing thanks to the scumbags at lg....should I just say f it and get it done and spend a fortune on a stupid ass cam swap, put another cam in or just put the stocker back in and give up...ane does anybody have a clue on the labor for the cutting...my cars already been there a month and I'm over it ....advice please! ]]> Corvette Performance Redcorvette2000 http://www.ls1tech.com/forums/corvette-performance/1206273-emergency-ls3-cam-swap-advice.html American exotic compilation http://www.ls1tech.com/forums/corvette-performance/1206253-american-exotic-compilation.html Wed, 18 Nov 2009 01:34:00 GMT ****I LOVE VETTES, VIPERS, FORDGT'S AND DRAG RACEING AND HAVE BEEN WORKING ON THIS LITTLE BY LITTLE FOR 2 YEARS NOW...I GO BY KILLEMALL OR TWISTER OR TORNADO OR SNAKEY DEPENDING IN WHICH FORUM IM ON....I SINCERELY HOPE THAT YOU FIND THIS COMPILATION USEFUL FOR BAR/WORK ARGUMENTS AND UP TO DATE****





***IN 1990 CHEVY GAVE US THE MONSTER THAT REALLY STARTED IT ALL...THE ZR1***

1990-1995 ZR1 (375-405 HP) *created by me*

JeffVette...1990...12.60@113.0mph
ZrWon.......????...12.89@112.0mph
ZrDon.......1990...12.97@113.0mph
LanJet......1994...12.99@110.0mph
ChrisLester1990...13.13@113.0mph
Zr168.......????....13.20@110.0mph
Scoob.......????...13.41@107.4mph
VetteGuy..1991...13.70@107.0mph





*** BUT DODGE HAD PLANS TO TAKE THE CROWN AND BUILT THE VIPER RT10...BUT WAS IT ENOUGH***

Gen1 1992-1996 RT10 Viper (385-400 HP) *ceated by me*

Rich detert...1994RT10....12.3...111mph
Jcarter........1994RT10....12.6...116mph
Bill..............1994RT10....12.9...109mph
MrJ.............1992RT10....13.4...106mph





***WITH THE ZR1 A LIL TO CLOSE FOR COMFORT TO THE RT10 DODGE ADDED 50 HP AND A GTS COUPE TO SEAL THE DEAL***

GEN 2 1996-2002 GTS @ 1997-2002 RT10 (450 HP) (ACR Vipers are 460 HP) *created by me*

JamieFurman..????ACR......11.5...123mph
EvanSmith.....2001RT10....11.7...120mph
Z06vrsViper...2001RT10....11.7...119mph
JimNordgren...1996GTS.....11.7...119mph
SilverViper...****GTS......11.8...120mph
Jeffhelms.....2000ACR.......11.8...119mph
KeithBraitly..1996GTS.......11.8...118mph
KevinMcdonald.2001RT10..11.8...117mph
JeffTyler.....1996GTS.......11.9...121mph
SocalRebel....2000RT10....12.0...120mph
MrMe..........2000RT10.....12.0...116mph
JamieParker...1996GTS.....12.1...120mph
Jcarter.......1999GTS.......12.2...120mph
RickD.........2000GTS.......12.3...121mph
HowardGoldman.2001GTS.12.3...118mph





***BUT CHEVY WASNT TO SIT ON IT'S HEELS AND BUILT A MUCH CLOSER COMPETITOR WITH THE Z06***

C5Z06 2001-2004 (385-405 HP) *created by corvetteforum*

11.783 @ 116.90--1.818--J-Rod
11.818 @ 117.26--1.783--Ranger
11.844 @ 117.91--1.761--Gary2004Z06
11.93x @ 119.xx--1.xxx --Esoteric
11.97x @ 118.80--1.90x--GMHTP
11.99x @ 117.61--1.xxx --02Z06Racer
12.048 @ 115.92--1.866--pwrshfd
12.08x @ 115.95--1.83x--Pray
12.131 @ 120.65--1.970--zapp109
12.205 @ 117.96--1.91x--Nat04Z06
12.21x @ 112.XX--1.87x--Blue Angel
12.227 @ 115.09--2.011--ZR WON
12.25x @ 117.xx--1.xxx --J Z06
12.27x @ 115.16--1.957--SpeedFreak





***DODGE SEEING WHAT THE Z06 WAS CAPABLE OF SAW THE NEED FOR A ANOTHER 50 HP....BUT IT WASNT THE Z06 THE VIPER REALLY NEEDED TO FEAR***

GEN 3 SRT10 2003-2006 Viper (510 HP) *created by me*

SpeedFreak..2006Vert...11.5...122.6mph
ViperJim.......2003Vert...11.5...121mph
JustinBell......2003Vert..11.7...123.6mph
JohnMyrick....2003Vert..11.8...122.9mph
UtahViper......2003Vert..11.8...119mph
Outfan2929...2003Vert..11.8...119mph
RickMay........2004Vert..11.9...123mph
Eagle............2004Vert..11.9....123mph
Dman............2003vert..11.9...122.3mph
Hamrhead...2006Coupe..11.9...122mph
Ulllose...........2003Vert..11.9...121mph
Boosted349..2006Coupe.12.0 at 121 mph
TomDickson....2004Vert..12.0...118mph
MrJ..............2003Vert...12.2...120mph
RickMartino...2003Vert...12.1...118mph





***IT WAS THE FORD GT...FORD SURPRISED EVERYONE WITH IT'S NEW BEASTE ON THE STREETS THAT COULD OUT RUN THE NEW VIPER AND RUN LAPPS AROUND THE Z06***

FordGT 2004-2006 (550 HP) *created by me*

Jamie Furman...11.54...126mph
Milton.............11.96...122.9mph
Chad..............12.00...122mph





***BUT CHEVY SHOCKED THE WORLD BUILDING A NEW AND FASTER Z06 WITH 100 MORE HP THAT MADE THE VIPER LOOK SLOW AND THE FORD GT A LITTLE TIMID***

C6Z06 2006-present (505 HP) *created by corvetteforum*

10.981 @ 128.90--1.77---Jamie furman
11.138 @ 127.20--1.76---Ranger
11.198 @ 123.75--1.81---walterm32
11.242 @ 122.38--1.68---Dr.Ron
11.311 @ 122.89--1.80---BLU-BY-U
11.349 @ 124.97--1.75---zosix427
11.392 @ 124.84--1.92--- C5 Frank
11.429 @ 124.88--1.86---dgdoc
11.443 @ 125.93--1.95---O7zeeO6
11.458 @ 124.13--1.80--- layjzay
11.488 @ 123.86--1.80---Z06kait
11.545 @ 123.16--1.83---dpracing
11.554 @ 124.13--1.86---jtfx
11.557 @ 126.68--1.95---Incon306
11.560 @ 124.53--1.85---Zlicious





***BUT THEN THE VIPER SHED IT'S SKIN REVEALING AN ADDITIONAL 95 HORSE POWER AND JUST ENOUGH TO AGAIN BE CROWNED KING OF THE HILL BY BARELY EDGING OUT THE C6Z06***

GEN4 2008-2010 SRT10 Viper (600 HP) *created by me*

Jamie Furman.....VERT...10.92@129.7mph
Jamie Furman.....ACR.....11.07@129.8mph
Utah Viper.......????......11.19@126.2mph
EvanSith.........????......11.39@129.7mph
1BadGts..........????......11.45@127.0mph
Mkb96Viper.......????.....11.54@124.5mph
Live2Race........????......11.56@129.7mph
FikseGts.........????.......11.60@125.3mph
BW...............????........11.60@124.8mph
Ray..............COUPE.....11.65@129.3mph





***BUT SHORT LIVED THE VIPERS REIGHN WAS INDEED AS THE ONE THAT STARTED IT ALL HAS NOW FINISHED IT..THE NEW ZR1 HIT THE TRACKS WITH AN ADDITIONAL 233 HORSE POWER FROM IT'S 405 HORSE POWER ROOTS AND HAS SINCE BEEN THE DOMINANT THREAT TO ALL OPOSERS***

2009-present ZR1 (638 HP) *created by me*

Jamie Furman......10.79@132.2mph
Racerns.............10.85@129.89mph
Z06Jeff..............11.05@129.0mph
Howydo.............12.00@131.0mph



***MORE TO COME AS THE VIPER WILL BE UNITING WITH FERRARI ENGINEERS AND THE NEW VIPER WILL HIT THE STREETS IN 2012.....WHO KNOWS WHAT TYPE OF SERPANT WILL BE UNLEASHED*** ]]> Corvette Performance Killemall http://www.ls1tech.com/forums/corvette-performance/1206253-american-exotic-compilation.html <![CDATA[17" rims on a C6Z]]> http://www.ls1tech.com/forums/corvette-performance/1206116-17-rims-c6z.html Tue, 17 Nov 2009 20:07:04 GMT Does anyone out there know if the C5Z, 17" rims will fit on the rear of a C6z?

Just looking for some cheap rims so I can run the M&H 325/45/17 tire on them for the strip.

Thanks in advance. ]]> Corvette Performance Domsz06 http://www.ls1tech.com/forums/corvette-performance/1206116-17-rims-c6z.html need driver side plastic headlamp cover..... http://www.ls1tech.com/forums/corvette-performance/1206032-need-driver-side-plastic-headlamp-cover.html Tue, 17 Nov 2009 16:27:42 GMT a week ago a rock came off a truck in front of me nd cracked the plastic headlamp cover on my EB 02 z06. I cant find one anywhere. Anyone know where to get a used one? or what it would cost to replace from a dealer (painted)? this is driving me crazy. thanks in advance for any and all help. a week ago a rock came off a truck in front of me nd cracked the plastic headlamp cover on my EB 02 z06. I cant find one anywhere. Anyone know where to get a used one? or what it would cost to replace from a dealer (painted)? this is driving me crazy. thanks in advance for any and all help. ]]> Corvette Performance doug98ta http://www.ls1tech.com/forums/corvette-performance/1206032-need-driver-side-plastic-headlamp-cover.html C6zo6 Stinger Package with exhaust http://www.ls1tech.com/forums/corvette-performance/1205597-c6zo6-stinger-package-exhaust.html Mon, 16 Nov 2009 17:16:16 GMT HPE Custom cam Kit .700 Lift Dual springs. Kooks Headers and X Pipe Ported Throttle Body Callaway Intake Corsa exhaust This car has a very mild cam for a C6Z06 it was built for an older gentlemen. Hope you guys like the results. Image:... HPE Custom cam Kit .700 Lift Dual springs.
Kooks Headers and X Pipe
Ported Throttle Body
Callaway Intake
Corsa exhaust

This car has a very mild cam for a C6Z06 it was built for an older gentlemen. Hope you guys like the results.

Attached Thumbnails
Click image for larger version Name: photo-9.jpg Views: N/A Size: 99.9 KB ID: 206067  
]]> Corvette Performance Austin@HPE http://www.ls1tech.com/forums/corvette-performance/1205597-c6zo6-stinger-package-exhaust.html Steering console question http://www.ls1tech.com/forums/corvette-performance/1205560-steering-console-question.html Mon, 16 Nov 2009 15:15:27 GMT Image: http://i67.photobucket.com/albums/h311/k5v9nh1l12/corvette/console.png Image: http://i67.photobucket.com/albums/h311/k5v9nh1l12/corvette/consolecolored.png As seen above... the interior of a convertible with the convertible control button (colored green in the right picture) on the left...

As seen above... the interior of a convertible with the convertible control button (colored green in the right picture) on the left of the steering wheel.

I would like to get that in my car (not a convertible).
I plan on using this button for a mod (cut outs).

I was hoping anyone knew the name for that (colored red in the right picture) piece of the center console was called, so I can go some where to buy that piece and be able to wire in that button to cutouts. I like this idea more than buying a sepreate switch board because I like to keep the interior looking stock as possible (buying a switch board will make it obvious I've had something done).

Thanks ]]> Corvette Performance ls2kev http://www.ls1tech.com/forums/corvette-performance/1205560-steering-console-question.html Enough to Run a Bolt on C6 Z06? http://www.ls1tech.com/forums/corvette-performance/1205319-enough-run-bolt-c6-z06.html Sun, 15 Nov 2009 23:48:35 GMT With the mods I have, I put down 444whp and 413TQ on the dyno. Granted, dyno numbers are fairly generic and can be decieving so I know that really doesn't do the car justice. I need to get it to the track and get some e.t.'s but for now I need an opinion. I am still on street tires and LS6 intake(I know), with these mods and I am a pretty good driver, hpw do you think the outcome would be with me roll racing a full exhaust, intake, tune C6 Z06 who is also on street tires? ]]> Corvette Performance TransAmcoupe98 http://www.ls1tech.com/forums/corvette-performance/1205319-enough-run-bolt-c6-z06.html