http://www.ls1tech.com/forums WA, OR, ID, MT, WY, SD, ND en Sun, 22 Nov 2009 10:49:23 GMT vBulletin 60 http://images.ibsrv.net/ibsrv/res/src:www.ls1tech.com/get/forums//images/misc/rss.jpg http://www.ls1tech.com/forums http://www.ls1tech.com/forums/northwest-members/1203958-focus-track-car-vid.html Wed, 11 Nov 2009 14:06:06 GMT Fully built JE Pistons, Eagle Rods, custom cams from cosworth running 14psi Dynoed 328 on pump gas on a Mustang Dyno, suspect close to 350 on 110 octane at the track. On the Dyno we pulled it to 7800rpm and it was still making power and boost and climbing :) This vid is street tune on... Fully built JE Pistons, Eagle Rods, custom cams from cosworth running 14psi

Dynoed 328 on pump gas on a Mustang Dyno, suspect close to 350 on 110 octane at the track.

On the Dyno we pulled it to 7800rpm and it was still making power and boost and climbing :)


This vid is street tune on 93 oct

Short day as it looks like head gasket gives (this was the first session of the day) had to go home and get the COBRA to finish the weekend.


Car going back to engine builder today, he said he will take care of me.


When I get all the bugs worked out, this thing flies fast. :drive::drive:

Long time no see boys, how is the weather out there?


Ken




http://www.youtube.com/watch?v=_J7wUZ2yfts ]]> Northwest Members kens03cobra http://www.ls1tech.com/forums/northwest-members/1203958-focus-track-car-vid.html http://www.ls1tech.com/forums/northwest-members/1203616-ls7-carnage.html Tue, 10 Nov 2009 17:59:08 GMT Check out this customers LS7 that was put together by some hacker shop in SoCal: Image: http://i68.photobucket.com/albums/i39/tjwong/blownnumber8.jpg Number 8 totally destroyed Image: http://i68.photobucket.com/albums/i39/tjwong/righthead.jpg Number 8 chamber with both valves MIA ... Check out this customers LS7 that was put together by some hacker shop in SoCal:


Number 8 totally destroyed


Number 8 chamber with both valves MIA


Number 7 chamber


Number 7 piston MIA



Intake contained at least 1 Lb of piston and cylinder wall debris



Debris in oil pan







2 Clutch pressure bolts backed out until one thread, the others loose ]]> Northwest Members tjwong http://www.ls1tech.com/forums/northwest-members/1203616-ls7-carnage.html http://www.ls1tech.com/forums/northwest-members/1203457-wanted-93-97-v6-shell.html Tue, 10 Nov 2009 05:22:30 GMT My little bro got his licsence and then got in a wreck about 2 hours later. Now we are on the hunt for a 93-97 v6 shell, we have good working drivetrain, just the door and quarter panel are damaged and will cost more than the car is worth to fix. Or if someone is looking for a good parts I think he... My little bro got his licsence and then got in a wreck about 2 hours later. Now we are on the hunt for a 93-97 v6 shell, we have good working drivetrain, just the door and quarter panel are damaged and will cost more than the car is worth to fix. Or if someone is looking for a good parts I think he wants $900 for it, not totaled title. Runs and drives 94 v6 5spd new clutch. ]]> Northwest Members smokinponcho73 http://www.ls1tech.com/forums/northwest-members/1203457-wanted-93-97-v6-shell.html http://www.ls1tech.com/forums/northwest-members/1203428-wtb-t-56-tranny-gto.html Tue, 10 Nov 2009 03:48:03 GMT new or used will pick up anywhere in the NW im located in seattle, washington message me or something with prices or if anyone knows where i can get one for a fair price thanks new or used will pick up anywhere in the NW im located in seattle, washington message me or something with prices or if anyone knows where i can get one for a fair price thanks ]]> Northwest Members TuscanyLs1 http://www.ls1tech.com/forums/northwest-members/1203428-wtb-t-56-tranny-gto.html http://www.ls1tech.com/forums/northwest-members/1202554-few-things-sale.html Sun, 08 Nov 2009 04:26:51 GMT I have a few things left over from selling my car, Id like to sell locally, Nitrous Express kit, MSD Digital 6 and a MSD RPM activator, Ive listed them in the classifieds here http://www.ls1tech.com/forums/non-lsx-parts-sale/1202552-few-things-here.html#post12477565 Let me know if your interested,... I have a few things left over from selling my car, Id like to sell locally, Nitrous Express kit, MSD Digital 6 and a MSD RPM activator, Ive listed them in the classifieds here http://www.ls1tech.com/forums/non-ls...l#post12477565 Let me know if your interested, sure we can work something out. ]]> Northwest Members endobong http://www.ls1tech.com/forums/northwest-members/1202554-few-things-sale.html http://www.ls1tech.com/forums/northwest-members/1201774-new-project.html Fri, 06 Nov 2009 04:22:15 GMT Well I picked up a winter project think I am probably going to use most the parts off it for my 04 GTO. Its a 06 GTO 12k miles that had a nitrous backfire and burnt for a little while. Car came with 17" MT ET Street Radails, Aftermarket Fuel Pump, Harrop Diff Cover, Drag Bags, SLP Sway Bar, Aluminum Driveshaft, spec stage 3+ clutch, driveshaft safety loop, subframe connectors, GGM Shifter, mid length headers with catless mids, 2 nitrous bottles, magnaflow catback exhaust and nitrous and fuel pressure gauges with gauge pods. Swapped the tail lights today and going to take the rear bumper cover off have it painted yellow and throw it on there. When we pull the motor to swap the 408/L92 setup into our 04 we will put all the aftermarket off it on there. I am not using most the interior and some of the aftermarket parts so if anyone is interested in any parts let me know. I picked it up for 3k so I think I did ok




]]> Northwest Members 2002BLKTA http://www.ls1tech.com/forums/northwest-members/1201774-new-project.html http://www.ls1tech.com/forums/northwest-members/1201607-does-anyone-have-ms3-cam.html Thu, 05 Nov 2009 22:00:44 GMT im looking into the ms3 cam for my car, and ive heard they can be streetable with a good tune. so i was wondering if anyone that had a ms3 would let me ride in their car just so i could see for myself. thankyou im looking into the ms3 cam for my car, and ive heard they can be streetable with a good tune. so i was wondering if anyone that had a ms3 would let me ride in their car just so i could see for myself. thankyou ]]> Northwest Members 02sslayer http://www.ls1tech.com/forums/northwest-members/1201607-does-anyone-have-ms3-cam.html http://www.ls1tech.com/forums/northwest-members/1201287-need-my-cts-v-tuned.html Thu, 05 Nov 2009 03:36:39 GMT I live near Seattle does anyone know of a good shop to get a cam head and tune on a 05 cts-v LS-6 thanx I cant find a shop to tune my ls6 I live near Seattle does anyone know of a good shop to get a cam head and tune on a 05 cts-v LS-6 thanx I cant find a shop to tune my ls6 ]]> Northwest Members RobDalton http://www.ls1tech.com/forums/northwest-members/1201287-need-my-cts-v-tuned.html http://www.ls1tech.com/forums/northwest-members/1198967-nw-wash-need-motor-mounts-changed.html Fri, 30 Oct 2009 18:04:04 GMT im on whidbey island ...and i was wonderin if anyone wanted to make some extra money by changing out my motor mounts 281 620 3182 if your interested im on whidbey island ...and i was wonderin if anyone wanted to make some extra money by changing out my motor mounts

281 620 3182 if your interested ]]> Northwest Members 91rs350 http://www.ls1tech.com/forums/northwest-members/1198967-nw-wash-need-motor-mounts-changed.html http://www.ls1tech.com/forums/northwest-members/1198952-tb-porting.html Fri, 30 Oct 2009 17:22:46 GMT Anyone port throttle bodies around the Whidbey Island area? Anyone port throttle bodies around the Whidbey Island area? ]]> Northwest Members WhiskeySierra6 http://www.ls1tech.com/forums/northwest-members/1198952-tb-porting.html